Related Manuals for Disc Makers PowerPro
Summary of Contents for Disc Makers PowerPro
- Page 1 Elite Setup Guide- Thermal Printer Hardware Installation and Setup Guide PowerPro Thermal Printer This Printer Guide is to be used in conjunction with the Elite Hardware and Setup Guide.
-
Page 2: Service And Contact Information
Free lifetime technical support. Disc Makers' Technical Support Department is here to help you every step of the way with your duplication system. Our goal is to minimize your downtime and maximize the return on your investment. We offer FREE technical support to you for as long as you own your duplicator. - Page 3 Thermal Printer Option Installation of the PowerPro CD Printer Review the printer documentation included in the carton with the PowerPro printer. Install the thermal ribbon and ready the printer for printing. Perform and complete any printer checks before installing the printer onto the Elite unit.
- Page 4 Elite Setup Guide- Thermal Printer Step 3A Step 1 Locate the Thermal Tray and place it onto the Elite unit If your unit was shipped with the Inkjet Tray attached, remove the Using the hardware removed from the inkjet tray, install the InkJet Printer tray and keep the mounting hardware.
- Page 5 Step 5 Apply power to the printer and allow it to become ready for Place the PowerPro into the Tray with the Front of the service. Open the ACC on the Elite host system and follow Printer being inserted first, then allow the back end to drop into the alignment steps.
- Page 6 Elite Setup Guide- Thermal Printer With the printer set up, follow these steps to allow final set-up: Open the ACC (Autoloader Control Console) this will allow the printer to be aligned. When the ACC is opened, click on Run Diagnostics and allow the loader and printer to cycle.
- Page 7 Elite Setup Guide- Thermal Printer Now test the printer. With the printer aligned to load the CD- DVD correctly, open the PowerPro label software. Make a test image in the software and print several discs manually by loading the printer by hand.
Need help?
Do you have a question about the PowerPro and is the answer not in the manual?
Questions and answers