Advertisement
Quick Links
Installing HWN Phone Jacks
1
Connect the Phone Jack
1. Write down the Phone Jack serial number. You will need this
information in order to register the jack with the Controller. The
serial number is located on the jack label.
2. Plug the phone line from the standard telephone, FAX machine,
etc., into the Phone Jack.
3. Plug the Phone Jack into a standard 120v power outlet.
The HWN Phone Jack allows you to connect
standard telephones, modems, FAX machines,
and answering machines to your Home Wireless
Networks communications system.
Note: The network Controller must already be
installed and incoming phone lines connected to it
in order to add a Phone Jack to the network.
1
Advertisement
Summary of Contents for Home Wireless Networks HWN Phone Jacks
- Page 1 Installing HWN Phone Jacks The HWN Phone Jack allows you to connect standard telephones, modems, FAX machines, and answering machines to your Home Wireless Networks communications system. Note: The network Controller must already be installed and incoming phone lines connected to it in order to add a Phone Jack to the network.
- Page 2 Register the Phone Jack with the Controller You can register a new Phone Jack from either a Handset or a network PC. The following procedure describes the registration process using a Handset. For information on registering a Phone Jack from a network PC, see the Network Reference Manual that came with the Controller.
- Page 3 5. Press # to advance to the next space; 6. Press 0 as many times as necessary to delete the remaining unwanted text; 7. Press END when finished. 9. When asked to confirm that the serial number and name are correct, press 1 (Yes) to continue or 2 (No) to re-enter the data.
-
Page 4: Safety Instructions
Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. - Page 5 shock. If service or repair work is required, take the unit to a qualified technician. 11. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: • The power cord is damaged or frayed. •...
-
Page 6: Regulatory Information
Regulatory Information Interference Information Some telephone equipment generates, uses, and can radiate radio frequency energy, and if not installed and used properly, may cause interference to radio or TV reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 7: Warranty Information
Warranty Information Limited Warranty, Disclaimer And Limitation Of Liability Home Wireless Networks, Inc. (“HWN”) warrants that this product will be free from defects in material and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser of the product. - Page 8 Return Instructions Should a Home Wireless Networks system component fail during the 12- month warranty period, contact your HWN Customer Service Representative at 1-888-WHY-WIRE for instructions on returning the failed component.
- Page 12 Global Headquarters 3145 Avalon Ridge Place, Suite 200 Norcross GA USA 30071 1-888-WHY-WIRE (949-9473) www.homewireless.com ©1999 Home Wireless Networks, Inc. All rights reserved. Part Number: 84-0003-000 A019 Printed in USA...
Need help?
Do you have a question about the HWN Phone Jacks and is the answer not in the manual?
Questions and answers