Safety Information - DStv HD Decoder Quick Manual

Safety Information

This DStv HD Decoder meets International Safety Standards. Please read the following
recommended safety precautions carefully.
Mains Supply
The DStv HD Decoder operates at 12 V DC and is connected to the mains supply using the supplied
power supply, rated 100 - 240 Vac 50/60Hz. Connect the power supply to the decoder before
connecting the other end of the cable to the mains wall socket. Disconnect the power supply from
the mains before connecting or disconnecting any other cables to the decoder's back panel.
Liquids & Spillage
Keep liquids away from the DStv HD Decoder and do not put anything on top of it which may spill
(example: lit candles, plants or containers of liquid). Do not use the DStv HD Decoder in extreme
temperature and humid conditions.
Ventilation
It is essential to keep the DStv HD decoder cool. Do not block the ventilation holes and ensure that
free airflow is maintained around the decoder. To maintain adequate ventilation of the decoder,
ensure that there is at least 10cm of free space above and to the sides it. Never stand the DStv HD
Decoder on soft furnishings or on carpet. Do not use, or store the DStv HD Decoder near a heater
or where it is exposed to direct sunlight. Never stack other electronic equipment on top of, or below
the DStv HD Decoder.
Cleaning
Before cleaning the DStv HD Decoder, first disconnect it from the mains. Use a dry cloth to clean
the exterior.
34
DStv HD Decoder Quick Guide