Subscribe to Our Youtube Channel
Summary of Contents for RedCore American Comfort FP11
- Page 1 American Comfort Series Infrared Fireplace Heaters Models FP11, FP33 For more heaters visit our website: www.REWCI.com...
- Page 2 CONGRATULATIONS! ENJOY THE WARMTH AND AMBIENCE OF YOUR NEW ENERGY EFFICIENT INFRARED ELECTRIC FIREPLACE HEATER. PLEASE BE SURE TO READ AND RETAIN THIS SHORT AND EASY TO READ OWNER’S MANUAL. WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: Read all instructions before using this fireplace heaters ...
- Page 3 DO NOT burn wood or other materials in this fireplace. DO NOT strike fireplace glass. This unit includes fail-safe devices to prevent failure and/or damage. If the unit shuts off automatically for any reason, please refer to the troubleshooting section for further instructions. When transporting or storing the fireplace and cord, keep in a dry place, free from excessive ...
- Page 4 SET UP THE FIREPLACE HEATER 1. Place the heating unit on a firm, level open surface free from obstructions and at least 3 ft. (0.9m) away from any combustible materials. DO NOT use on an instable surface such as bedding or deep carpeting. 2.
- Page 5 between 0 and 24 hours. 0 means there is no set running time and heater will run continuously. Press any number between 1 and 24 hours and the heater will run that number of hours, then automatically stop. 5. Change between Celsius and Fahrenheit. Press the C/F button once and it will show the temperature in Fahrenheit.
- Page 6 QUESTIONS AND ANSWERS Why does the blower fan not work after I have turned on the heater power button? The blower fan will not work until the heating element is hot enough to heat the air passing by. It will normally turn on after about 10 seconds.
Need help?
Do you have a question about the American Comfort FP11 and is the answer not in the manual?
Questions and answers