GE Profile PVM1790SRSS Installation And Owner's Manual page 224

Refrigerator Interior Shelves
(Shelves May vary by Model)
The refrigerator shelves of your refrigerator were designed with you
in mind. Their varied adjustability allows you to satisfy your personal
storage needs.
To remove or adjust a full-width
slide-out shelf: (see fig. # 5)
1. Gently tilt the shelf up and slide forward until the shelf has been
completely removed.
2. To replace the shelf, select the desired setting and gently slide the
shelf back until it rests in the locking position.
Crisper and Crisper Cover
To remove and install the crisper: (see fig. # 6)
1. Grip the crisper firmly and slide out completely.
2. Replace the crisper by placing the crisper properly in position and
gently sliding it back into place.
Removing or replacing the crisper cover: (see fig. # 7)
1. Carefully grasp the crisper cover and slide out to remove.
2. To replace, slide the rear of the crisper cover into the right and
left slots above the crisper area and gently slide back into place.
fig. # 5
fig. # 6
fig. # 7
English
10