Mazda 2012 CX5 Owner's Manual page 209

CX-5_8CA5-EA-11L_Edition1 Page209
Monday, December 12 2011 11:30 AM
Three-dimensional object on vehicle rear
Because the distance guide lines are displayed based on a flat surface, the distance to the
three-dimensional object displayed on the screen is different from the actual distance.
(Screen display)
Sensed distance on screen A>B>C
qPicture Quality Adjustment
WARNING
Always adjust the picture quality of the rear view monitor while the vehicle is
stopped:
Do not adjust the picture quality of the rear view monitor while driving the vehicle.
Adjusting the picture quality of the rear view monitor such as brightness, contrast,
color, and tint while driving the vehicle is dangerous as it could distract your
attention from the vehicle operation which could lead to an accident.
There are four settings which can be adjusted including, brightness, contrast, color, and
tint. When adjusting, pay sufficient attention to the vehicle surroundings.
1. Press the setup button (
2. Touch the and
Touch the on-screen button to return to the camera image display.
Reset
All of the screen setting values can be reset to their initial settings.
1. Press the setup button (
Form No.8CA5-EA-11L
A
B
C
(Actual distance) B>C=A
) to display the picture quality adjustment screen.
on-screen buttons to change the set value.
) to display the picture quality adjustment screen.
Black plate (209,1)
Rear View Monitor
(Actual condition)
A
C B
When Driving
4-87