Function Check - Novo Nordisk NovoPen 3 PenMate Instruction Manual

NovoPen 3 PenMate Instruction Manual
Page 33
FDA revision #4 (final)
426
427 Need Help? Call 1-800-727-6500
428
429 SECTION 9
430
431

Function check

432 25 If you think your NovoPen 3 PenMate is not working properly, follow this procedure:
433 a) Check that the barrel and the NovoPen 3 PenMate are screwed together tightly and
434 that the dose indicator window on the barrel is aligned with the yellow push button on
435 the NovoPen 3 PenMate.
436 b) Screw on a new NovoFine needle as described in step10.
437 c) Clear the air bubbles as described in step11.
438 d) Put the outer needle cap over the needle.
439 e) Dispense 20 units into the needle cap.
440
441 The insulin should fill the lower part of the outer needle cap. If the pen has delivered
442 too much or too little insulin, repeat the test. If it happens again, do not use the pen.
443 Contact your supplier.
444 Do not try to repair a faulty NovoPen 3 or a faulty NovoPen 3 PenMate.
445 Never use NovoPen 3 or NovoPen 3 PenMate unless you are sure that they are
446 working properly.
447
Function check