Advertisement
Quick Links
CHAPTER 4 DIGITAL KEYPAD (VFD-PU05) OPERATION
4.1 Description of the Digital Keypad VFD-PU05
MODE Selection key
Press this key to view different
operating values
Left key
moves cursor to the left
FWD/REV Direction key
RUN key
4.2 Explanations of Display Messages
Messages Displayed
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
F
H
U
VFD-PU05
EXT PU
JOG
PU
STOP
RUN
RESET
Descriptions
Master frequency of the drive
Actual operation frequency output to the motor from
the drive
User-selected content (the side DC-BUS voltage)
4-1
VFD-V Series
LED Display
Display frequency, current, voltage
and error, etc.
Part Number
Status Display
Display the driver's current status
When "PU" lights, RUN/STOP is
controlled by PU05. When "PU" is
dark, RUN/STOP is set by 00-21.
When "EXT" lights, frequency
command and torque command
is set by 00-20. When "EXT" is dark,
it is controlled by PU05.
Right key
Moves the cursor right
STOP/RESET
4
Advertisement
Summary of Contents for Delta VFD-PU05
- Page 1 VFD-V Series CHAPTER 4 DIGITAL KEYPAD (VFD-PU05) OPERATION 4.1 Description of the Digital Keypad VFD-PU05 LED Display Display frequency, current, voltage and error, etc. Part Number VFD-PU05 Status Display Display the driver's current status When "PU" lights, RUN/STOP is EXT PU controlled by PU05.
- Page 2 1 second, it is an indication that the data has been accepted and saved to the internal memory automatically. Displayed when the preset data is not accepted or that the value goes over the limit DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED...
- Page 3 VFD-V Series 4.3 Operation steps of the Digital Keypad VFD-PU05 VFD-PU05 Operation Flow Chart Press UP key to select SAVE: save parameters READ: copy parameters Press PROG/DATA for XX-XX about 2 seconds or until it is flashing, then save/copy data from AC drive to PU05.