Table of Contents
Advertisement
To remove the telescopic sliding shelf supports:
■
Remove the side racks and the catalytic liners by unscrewing the fixing screws (Fig.
14).
■
Lay down the telescopic sliding shelf support and side racks, with the telescopic sliding
shelf support underneath.
■
Find the safety locks. These are the tabs that clip over the wire of the side rack (arrow
1 in Fig. 15).
■
Pull the safety locks away from the wire to release the wire (arrow 2 in Fig. 15).
Cleaning the sliding shelf supports:
■
Wipe the supports with a damp cloth and a mild detergent only.
■
Do not wash them in the dishwasher, immerse them in soapy water, or use oven cle-
aner on them.
Figure 14
Figure 15
1
2
1
17
Advertisement
Table of Contents
