Table of Contents
Advertisement
CONNECTION DIAGRAM
COMPUTER
Please study the connection diagram above.
1.
Connect the DJ IO's USB port to an available USB2.0 port on your computer, using the included
USB2.0 cable. The DJ IO will be powered through your computer's USB bus.
2.
(Optional) You can power the DJ IO by connecting an optional 6V 1A power adapter to the DC IN
input on the DJ IO. Please note that it is not necessary to have the adapter plugged in for the DJ
IO to work. However, you should connect this adapter if your computer is not able to supply
enough power to the DJ IO.
3.
Connect the OUTPUT 1 on the DJ IO to your main speaker or amplifier system, using a stereo
RCA cable.
4.
(Optional) Using a stereo RCA cable, connect the OUTPUT 2 on the DJ IO to a secondary
speaker or amplifier system to be used for monitoring purposes.
5.
Connect your headphones to the HEADPHONES output on the DJ IO. The signal output from
HEAPHONES will be the same as the signal being output from OUTPUT 2.
6.
Connect your microphone to the MIC THROUGH input on the DJ IO.
POWER ADAPTER (optional)
USB
MICROPHONE
5
RCA
RCA
TO SPEAKER OR
TO SPEAKER OR
AMP SYSTEM
AMP SYSTEM
(MASTER)
(MONITOR)
HEADPHONES
Advertisement
Table of Contents
