Settings & Tools
When the following settings are set,
Ringer is not activated.
When All Sounds Off/ Alarm
G
Only is set or individual Contact
Ringer ID is set to No Ring .
9.2 End Call Options
Allows you to set the option to end
a call.
1. From standby mode, press
[ MENU ].
2. Press
Settings & Tools .
3. Press
Call Settings .
4. Press
End Call Options .
5. Use the Directional Key
select Close Slide or End Key
Only , then press
9.3 Call Forwarding
Allows you to configure call
forwarding.
1. From standby mode, press
[ MENU ].
2. Press
Settings & Tools .
3. Press
Call Settings .
4. Press
Call Forwarding .
88
88
to
.
5. Select Forward Call , enter the
number you wish to forward your
calls to, then press
[FORWARD] . You can also
select Cancel Forwarding if you
are currently forwarding your
calls.
9.4 Auto Retry
Allows you to set the length of time
the phone waits before
automatically redialing a number
when the attempted call fails.
1. From standby mode, press
[ MENU ].
2. Press
Settings & Tools .
3. Press
Call Settings .
4. Press
Auto Retry .
5. Use the Directional Key
highlight a setting, then press
The following options are
available:
Off/ Every 10 Seconds/ Every
30 Seconds/ Every 60 Seconds
to
.