Page 1
Instruction Manual Instruction Instruction Instruction Manual Manual Manual heck heck heck heck Model Model Model Model WLS520-A WLS520-A WLS520-A WLS520-A REF. REF. REF. #: #: #: #: D D D D 1402 1402 1402 REF. 1402 MODEL MODEL 7TWLS520-A 7TWLS520-A...
Please read the manual first. It will help you assemble, prepare, operate and maintain the unit for best performance. Pay special attention to the safety instructions before operating. For future reference, please copy the model number and the serial number of the equipment you purchased in the space below. Model Number: Serial Number: If you have difficulty or any problems regarding the assembling, operation or maintenance of this unit,...
Locate model plate and safety label on the equipment. Read and follow the instructions in them. Model plate (WLS520-A) Model plate (7TWLS520-A) Note: S6 %40, continuous operation periodic duty: time of one load cycle is 10 minutes, operation time at constant load is 4 minutes, operation time at no-load is 6 minutes.
Safety label Symbols meaning Warning: Moving parts. Never place Read the manual carefully body between log and ram during before assembly, operation forward or reverse stroke. and maintenance. Wear safety gloves. Allow only one person to operate this machine on the workbench, keep bystanders away.
Feed time Retract time Max. cylinder stroke 520mm 520mm Noise emission value ≤68dB(A) ≤68dB(A) Vibration of control handle ≤2.5m/s ≤2.5m/s Environmental data WLS520-A, 7TWLS520-A Operation Altitude ≤1000m Temperature 5~40℃ Humidity 40℃ ≤50% 20℃ ≤90% Transportation & storage temperature (℃) -25~+50...
6. 6. 6. 6. Component Component Component parts parts diagram diagram Component parts parts diagram diagram Note: Note: Note: Note: Due to continuous product improvement, we reserve the right to change the product without prior notice. 5 5 5 5...
Ref. No. Part Description Ref. No. Part Description Optional four way wedge 41-44 Oil tube assembly (tank -pump) Tank with wedge 45-47 Hydraulic pump assembly Oil filter 48-51 Motor rear plate assembly Motor shell Nylon liner Stator Base plate assembly of ram Rotator 10-13 Log cradle assembly...
SECTION SECTION SECTION SECTION 2: 2: 2: 2: Safe Safe Safe Safe Operating Operating Operating Operating Instructions Instructions Instructions Instructions NOTE: This machine is only intended for homeowners to split firewood as detailed in instructions, not for any other purpose. Danger Danger Danger...
Before starting work, hydraulic pipes and hoses shall be inspected and the stopping devices should be tested. Selection and preparation of a suitable working are free from obstructions. The need to keep the working area free from obstructions, e.g. logs, split wood, etc. Check on the function of the machine: operate the unit without loading to check whether this unit works normally (Refer to terms 3.
5. 5. 5. 5. Maintenance Maintenance Maintenance repair repair Maintenance and and repair repair • • • • Refer to the Components drawing and parts list should it become necessary to disassemble the unit for repair or replacement of parts. NOTE: Ensure the power cable is unplugged while performing any maintenance and repair.
Page 11
GUARANTEE GUARANTEE GUARANTEE GUARANTEE IMPORTANT IMPORTANT IMPORTANT IMPORTANT Please Please return return this this product product without without first first Please Please do do not not return return this this product product without without first first calling calling Customer Customer Service Service number...