E-Mu E4k User Manual page 10

ONWARD...
Tip: Banks in the Sprint
folder contain only one preset
each.
10
12. If you want to check out the individual presets, press the Omni key. This
puts you back into "single preset mode". Select presets using the data
entry control, inc/dec keys or the left/right cursor keys.
13. To select a bank from a different folder, press the Arrow key, then Load.
14. From the screen shown above, use the up cursor key to select the folder
field. Use the data entry control or inc/dec keys to select another folder.
After selecting new folder, move the cursor back down to the bank field
to select a bank. Press OK to load the bank.
15. Once the bank has loaded, use the data entry control, inc/dec keys or the
left/right cursor keys to select presets within that bank.
Easy as cake...
You're probably starting to learn your way around. Feel free to explore. That's
what the E4K is all about. You don't have to worry about losing any sounds
unless you Save a bank over another one. So go forth and conquer. The E4K
is an incredibly powerful instrument and you won't learn it all overnight. Be
patient and don't be afraid to get in there and experiment.
Going back into SoundSprint mode...
When you try to load SoundSprints after loading a bank, you will inevitably
come across a small roadblock in the form of a "Sample Memory Full" mes-
sage. Not to worry. You have to erase the bank first. Here's how...
1. Switch back to Omni mode. SoundSprint does not work in Multi mode.
(Main Screen, Arrow, Omni)
2. Press the Master module button on the front panel.
3. Press Bank. Three additional soft-key buttons will appear.
4. Press Erase. A pop up dialog box inquires if you really want to erase all
presets, samples and sequences from the bank.
5. Yes you do, so press OK (F6) to erase the bank.
6. Now press Assignable Key 3. This key jumps you immediately into Sprint
mode. (See page 5 if this key does not work as promised.)
Getting Around on the E4K