Paglight C6 - PAG Paglight C6 Instruction Manual

SECTION 2

PAGLIGHT C6

SAFETY INSTRUCTIONS:
Please read these important safety and operating instructions
fully before using the Paglight C6.
6V INPUT ONLY. DO NOT CONNECT TO INCORRECT SUPPLIES.
The Paglight C6 has been specifically designed as a 6V unit and on
no account should any attempt be made to 'convert' it for use with
12V supplies. Such attempts will irreversibly damage the Paglight
C6 and invalidate the warranty.
Paglight C6 is designed for use with 10W, 20W and 30W, 6V,
G4-sized lamps only. A 6V 20W lamp is included in this kit.
Replacement 6V 20W, 10W and 30W lamps are available from
PAG Ltd.
The Paglight C6 can be used in light rain and moderately
damp environments. However, the internal lamp operates
at high temperatures, and direct contact with water should
be avoided.
The Paglight C6 is not intended for any use other than video
lighting purposes. This product should be kept out of the reach
of children.
Do not disassemble. Incorrect reassembly may result in a
safety hazard.
Do not operate if the fixed safety glass is cracked or broken.
The Paglight C6 will become warm in use. Do not leave it switched
on while unattended. Do not obstruct the cooling vents or operate
near combustible materials. Allow the light to cool before storage.
8