Cardinal Gates VG-65 Assembly Instructions

FOR DOOR AND STAIRWELL SAFETY, ROOM DIVIDER, RETAINING GATE, OR PLAYPEN ENCLOSURE.
ASSEMBLY INSTRUCTIONS
A.
B.
(10X)
(8X)
J.
(4X)
FOR GREATER PROTECTION BUILD GATE WITH RED OPENING
BUTTON AWAY FROM CHILD.
HINT:
FOR BUILDING EASE,
CONSTRUCT GATE WITH PARTS
1
LAYING ON FLOOR.
2X
1. Attach both extensions to door gate by inserting
hinge rod (J) through gate end holes and attach
with long bolt (B). Tighten using wrench (K).
3
3. Attach end hinge rods (J) to ends of extensions
and add end caps (E) with long bolt (B). Repeat
at each corner of extensions.
TO OPEN:
Push red safety button and lift handle 90
to open.
INTENTED FOR USE WITH CHILDREN FROM 6 MONTHS - 24 MONTHS. THIS PRODUCT WILL NOT PREVENT ALL ACCIDENTS. TO PREVENT FALLS, NEVER USE AT TOP OF STAIRS.
VERSAGATE (Model VG-65)
C. D.
(4X) (8X)
K.
B.
J.
B.
B.
E.
J.
4X
GATE OPERATION
o
upwards. Pull gate
F.
E.
(4X) (4X)
(4X)
K.
2
2X
2. Adjust gate to desired angle (90
guides of foot (H). Attach gate to foot with (2)
two (C) screws. Repeat on other side.
4
WALL MOUNTING
4X
A.
4. Insert screw anchor if mounting to drywall. Mount
gate to wall with screw (A) through wall brackets
(F & G). Repeat on each corner.
TO CLOSE:
Close gate and lower handle back to original postion. Gate
will click when locked.
G.
H.
(2X)
I.
(2X)
INSIDE
HOLE
C.
FLOOR MOUNT
HOLE
H.
o o
to 135
STEPS FOR
GREATER
STABILITY:
1) MOUNT AS CLOSE TO TOP
AND BOTTOM OF GATE AS
POSSIBLE.
G.
D.
F.
2) AFTER GATE IS IN PLACE,
USE LONG SCREW (A) TO
MOUNT FOOT TO FLOOR.
A.
OUTSIDE
HOLE
) using