Power Supply; Cables - Silvercrest TM-210 User Manual

English

Power Supply

The power switch of this device does not fully disconnect the device
from the mains. The device consumes electricity in the Standby
mode. In order to completely disconnect the device from the mains,
the power adapter must be pulled out from the wall outlet. For this
reason, the device should be positioned in a way that assures direct
and unobstructed access to the wall outlet so that the power adapter
can be immediately pulled out in an emergency situation. To avoid
the danger of fire if the power adapter is not going to be used for a
long while (e.g. during holidays) it should always be disconnected
from the power socket. Before stormy weather when there is the dan-
ger of lightning, disconnect the device from the power supply. Use
only the supplied power adapter SilverCrest TYT71200010EU (in the
UK SilverCrest TYT71200010UK) to avoid overheating, deformation
of housing, fire, electric shock, explosions and other dangers. Never
connect this power adapter to other devices.

Cables

Always hold cables by the plug and never pull on the power cord it-
self. Never hold the power cord with wet hands as this may cause a
short circuit or electric shock. Never place the device, heavy objects
or furniture on the cable and take care that the cord does not become
trapped, especially at the plug and sockets. Never make knots in the
cable and do not tie it together with other cords. All cables should be
positioned so that nobody can trip over them or be obstructed by
them. A damaged power cord can cause fire or an electric shock. In-
spect the power cord from time to time. Never use adapter plugs or
extension cables that do not comply with the current safety regula-
tions in your country, and do not modify any of the power cords or
power adapter yourself!
2
Silvercrest TM-210 (V1.1)