Operating Instructions
®
Busch-Wächter
4.2
Service area
1
2
3
Fig.:
Service area
No.
Function
1
Reset the potentiometer setting on the Busch-Watchdog to the factory settings and activate it.
To do this, press the button for at least 1 second.
2
Displays the current settings of the IR service remote control via the LED matrix.
3
Activate the test mode ("Activation test") for 10 minutes or deactivate it.
4.3
Navigation area
1
2
Fig. 3:
Navigation area
No.
Function
1
Brief press of the button:
• Activate the display area
• Select the functions (2)
Long press of the button (at least 1 second)
• Send the settings of the IR service remote control to the Busch-Watchdog
2
Navigation buttons for selecting functions
Operating Instructions | 1473-1-8141
Operation
®
— 8 —