Operating The Unit With The Adapter; Operating The Unit With Headphones; Caring For Your Geosafari Talking Globe; If Your Globe Fails To Operate Properly - Educational Insights GeoSafari Talking Globe Instruction Manual

Operating the Unit with the Adapter

With the optional AC adapter*, the GeoSafari Talking Globe can run
indefinitely without batteries. To use the globe with its adapter, follow
these directions:
1. Plug the end of the adapter cord into the AC adapter jack near the
back of the globe's electronic base.
• Your GeoSafari Talking Globe must only be used with the
recommended AC adapter, available from your authorized
Educational Insights dealer. The Educational Insights stock
number is EI-8702.
• Your AC adapter should be examined regularly for damage to the
cord, plug, enclosure, and other parts. In the event of such damage,
do not use this AC adapter until the damage has been repaired. The
adapter is not a toy. Disconnect the adapter from the unit before
cleaning the globe.
2. Carefully plug the adapter body into an electrical outlet.
• Your GeoSafari Talking Globe must not be connected to more than
the recommended number of power supplies.
• Your GeoSafari Talking Globe is not suitable for children under three
(3) years old.
3. Turn on your unit by pressing the ON/OFF button on the globe's base.

Operating the Unit with Headphones

The GeoSafari Talking Globe includes a headphone jack on the side of the
globe. Using the jack you can plug in a single headphone or a four-way
headphone splitter that allows up to four players to listen and play at the
same time. (Headphone and four-way headphone splitter are not
included, but are available from Educational Insights.)** To use the globe
with headphones, follow these directions:
For one player:
• Plug the cord from a single headphone into the headphone jack.
For two or more players:
• Plug the cord from the four-way headphone splitter into the
headphone jack.
• Plug the cord from each headphone into a receptor hold on the
four-way headphone splitter.
IMPORTANT: The GeoSafari Talking Globe must only be used with the
recommended four-way headphone splitter.
* Especially designed for GeoSafari Talking Globe - AC Adapter (EI-8702)
** Especially designed for GeoSafari Talking Globe - Four-Way Headphone Splitter (EI-8896)
and headphones (EI-3915)
4

Caring for Your GeoSafari Talking Globe

Treat your GeoSafari Talking Globe like a piece of furniture. It can be
dusted or wiped clean as often as necessary. Use a dust cloth sprayed with
an aerosol furniture cleaner to keep it dust-free.
NOTE: Do not spray anything directly on the globe or its base.
This globe is printed with quality light-fast inks. Keep it out of direct
sunlight.
Never use your globe as a toy. Do not throw it in the air. Do not use force
to make the globe turn. Treat it gently and it will last for years.

If Your Globe Fails to Operate Properly

1. Check the batteries. Weak batteries can cause a variety of
malfunctions. Dim lights are the first sign of weak or drained batteries.
Replace the batteries with a fresh set. If your globe will not be used
for an extended period of time, remove the batteries to prevent
possible corrosion.
2. Use the correct adapter. WARNING: Adapters not designed for the
GeoSafari Talking Globe can cause permanent damage to the unit's
electronics. Using any adapter other than the one especially designed
for the GeoSafari Talking Globe will void your warranty.
3. Be sure the adapter plug is inserted securely into the unit, and the
adapter body is inserted into the wall outlet.
NOTE: The adapter will not drain any batteries in the battery compartment.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
5