Fiesta Outdoor Gas Barbeque / Grill Use And Care Manual page 15

MATCH LIGHTING PROCEDURE
1.Open the lid before lighting
2. Place an ignited lighter or lit match through the
lighting hole, approx. 1/2" (1.25 cm) from burner.
(See Figure 11D)
3. Push in and turn the LEFT burner control knob to
'HIGH'. The burner should light immediately (within four seconds). If it does not,
extinguish the lighter or match, turn the control knob to off, and wait 5 minutes to
clear the gas.
4. Repeat steps 1 to 3. If burner fails to light, refer to the Troubleshooting Guide on
page 19 to determine cause and solution.
LIGHTING THE OTHER SIDE OF THE DUAL BURNER
Once one side of the dual burner has been lit, push in and turn the other control knob to
'HIGH'. The unlit burner will light automatically.
SIDE BURNER (OPTIONAL) USING THE STANDARD OR
PUSH BUTTON ROTARY IGNITOR
1. Open L.P. cylinder.
2. Push in and turn the side burner control knob to
"HI".
3. Depending on which ignitor you have, turn or
depress ignitor. Repeat if necessary (see Figure
12A).
4. If burner does not light immediately (within four
seconds), turn the burner control knob off, and
wait 5 minutes to clear the gas.
5. Repeat steps 1 to 4. If burner still fails to light,
refer to the Troubleshooting Guide to determine
cause and solution, or try the Match Lighting
Procedure on page 16.
USING THE ELECTRONIC IGNITOR
(For grills with this feature, reference Figure 12B)
1. Open tank valve, wait 5 seconds.
2. Turn required burner knob to "HI".
3. Push and hold ignitor button.
4. You should hear a "clicking sound" indicating your
electronic ignition is activated.
5. If burner does not light immediately (within four seconds), turn the burner control
knob off, and wait 5 minutes to clear the gas.
6. Repeat steps 1 to 5, if burner fails to light, refer to the Troubleshooting Guide to
determine cause and solution, or try the Match Lighting Procedure on page 16.
USING THE AUTO IGNITOR
(For grills with this feature, reference Figure 12C)
1. Open tank valve, wait 5 seconds.
2. Turn required burner knob to "
3. You should hear a "clicking sound" indicating your
electronic ignition is activated.
4. If burner does not light immediately (within four seconds), turn the burner control
knob off, and wait 5 minutes to clear the gas.
5. Repeat steps 1 to 5, if burner fails to light, refer to the Troubleshooting Guide to
determine cause and solution, or try the Match Lighting Procedure on page 16.
6. After grill lights turn knob to desired cooking position.
".
15
2.
2.
Fig. 12A
Fig. 12B
Fig. 12C
Fig. 11D
1.
1.