Haier LT26M1C Service Manual page 28

26"LCD TV
3.3 TV Signal type
1. RF Signal: Aerial input / 10mV(30-100dBuV)
2. Video signal:
a) CVBS input (RCA jack) / 1Vpp (300mV-sync, 700mV-video.)
b) S-video input / 1VppY-signal, +/-300mV C-signal
c) SCART input: CVBS、RGB signal ( for WE model only)
d) Component video in(YPbPr input)/ 1Vpp Y signal, +/-350mV Pb, Pr signal
e) HDMI input: Compliance with HDMI Specification 1.3a. 480i/p, 576i/p, 720p, 1080i/p signal handling capability.
3. Audio signal:
Audio (1) R/L for AV IN(AV and S-Video).
Level: - Nominal: 0.5 V rms.
- Maximum: 1.5 V rms.
- Impedance > 10 k
Audio (2) R/L for SCART IN
Level: - Nominal: 0.5 V rms.
- Maximum: 1.5 V rms.
- Impedance > 10 k
Audio (3) R/L for Component video IN.
Level: - Nominal: 0.5 V rms.
-Maximum: 1.5 V rms.
-Impedance > 10 k
Audio (4) digital audio for HDMI IN.
4. SCART output: (for WE model only)
Video: TV output 1Vpp / Impedance: 75Ω.
Audio: R/L output (from TV)
Level: Nominal: 0.5 V rms. Impedance < 10 k.
5. Headphone
Audio: R/L output –10mW at 32Ω.
3.5mm stereo jack. Impedance is between 8 and 600.
3.4 PC Timings List
Mode
Established
Timing
Standard Timing
.
.
.
Resolution
720 x 400--70Hz
640 x 480--60Hz
640 x 480--67Hz
640 x 480--72Hz
640 x 480--75Hz
800 x 600--56Hz
800 x 600--60Hz
800 x 600--72Hz
800 x 600--75Hz
832 x 624--75Hz
1024 x 768--60Hz
1024 x 768--70Hz
1024 x 768--75Hz
1280 x 720--60Hz
Haier LT26M1CA&LT26M1C
28
Dot Clock
28.32
25.175
30.24
31.5
31.5
36
40
50
49.5
57.28
65
75
78.75
74.25