Installing The Starter Rope; Filling The Engine With Oil - Toro Super Recycler 20383 Operator's Manual

4. Lock the handle at your desired height. Refer to
Adjusting the Handle Height in the Operation
section.
5. Torque the handle bolts to 120 to 160 in-lb (14 to
17 N-m).
6. Adjust the cutting height. Refer to Adjusting the
Cutting Height.
G017458
Figure 5
3

Installing the Starter Rope

No Parts Required
Procedure
Pull the starter rope through the rope guide on the
handle (Figure 6).
1. Starter rope
Note: To make the rope easier to install, squeeze the
control bar on the handle.
4

Filling the Engine with Oil

No Parts Required
Procedure
Important: Your mower does not come with oil
in the engine. Before starting the engine, fill the
engine with oil.
Max. fill: 20 oz. (0.59 l), type: SAE 30 or SAE 10W-30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.
1. Move the mower to a level surface.
2. Remove the dipstick (Figure 7).
6
Figure 6
2. Rope guide