Disconnect the GPS antenna cable (G).
2.
If the GPS antenna needs replacement, perform the procedures in
a.
Removal
If the GPS antenna does not need a replacement, do not detach the metallic tape securing
b.
the GPS antenna to the mainboard. This may damage the metallic tape and cause the
GPS signal to deteriorate. Instead, perform the procedures below:
(1)
(2)
Service and Maintenance
on page 5-46.
Using the plastic pry, pry to lift the circuit cover (A).
A
Figure 5-80. Removing the Circuit Cover (1 of 2)
Open the circuit cover to detach the GPS antenna from the mainboard.
Figure 5-81. Removing the Circuit Cover (2 of 2)
(Figure
5-79, page 5-50)
GPS Antenna
5-51