Table of Contents
Advertisement
• Bandwidth Control: Options to enable or disable Bandwidth Control. Default
setting is set to Disable
• Firewall Filter: Options to enable or disable Firewall Filter. If enabled, only
those IP address defined in QoS list can pass through the device.
• Default Upload Rate: Enter Default Maximum Upload Rate
• Default Download Rate: Enter Default Maximum Download Rate
Any traffic is not defined in the bandwidth control list/group will use this default upload
and download rate.
Click Next to save and continue.
- Primary Group
Primary Group Page allows administrator to create new group. After each group is
created, the group name will be displayed under Index Table. Each group should be
assigned a unique Group ID Number.
• Group Name: Name of the group you want to create. Group name will help
identifying different type of clients/customers
• Group ID: A unique group number assign for each group, must be between 2-
200
• Upload Rate: Upload rate for each specific group
• Download Rate: Download rate for each specific group
• Group List: This is for Modify and Remove purpose.
15
Advertisement
Table of Contents
