Download Print this page

Cleaning And Maintenance; Disposal Of Unit - Elgento E11001 Instruction Manual

Advertisement

LCD Display
When setting time, "00:00"displays on the LCD .After choosing the program and starting, the
clock will counts down and display the same time as the program needs.(Time displays minute
and second when time more than 1min,otherwise wil only display seconds)
The program will turn to heat preservation for 1 hour after it has finished, and the "00:00"on
the LCD will be flashing.
1. Power Indicator(Red E1)Plug in and the light on, plug out and the light off.
2. Heating Indicator(Yellow E2):Light on when the heater pipe is working otherwise off
3. Fermenting Indicator(Green E4):Light on during fermenting only
4. Baking Indicator(Blue E3):Light on during baking only.
Function of pre-check
Program will check the temperature of the baking pan before making bread. If the temperature
below 60
0
C, working will go ahead. If not the buzzer sounds 3 times (sound persisting for 3
seconds each time at interval 2 second), then turn off automatically.
The right 3 numbers showing "—H—"during the buzzer sounds.
Buzzer 2KHZ
1) Press key, the buzzer sounds ;keep pressing, the buzzer sounds for seconds;
2) After finishing baking and into heat preservation, the buzzer sounds 20 seconds

Cleaning and Maintenance

1. Before cleaning and maintenance, ensure that the appliance is completely disconnected from
any power source.
2. Wash the vessel and lid in warm soapy water and dry well.
3. Wipe the main unit with a damp cloth. It is not recommended for abrasive or solvent-based
cleaners to be use as this may damage the unit

Disposal of Unit

Disposal instructions for Elgento items in accordance with the WEEE directive.
Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are
required to dispose of old electrical and electronic appliances like this separately. Please visit
www.recyclemore.co.uk, or www.recylcenow.co.uk for access to information about the recycling
of electrical items. The WEEE directive, introduced in August 2006, states that all electrical items
must be recycled, rather than taken to landfill. Please arrange to take this appliance to your local
Civic Amenity site for recycling, once it has reached the end of its life.
Paperless Design:
We started thinking about how to make this packaging
"Green" from the very beginning,
and thought that using as little paper as possible would be
a good idea. So the whole design process was carried out
online. We didn't post anything, kept printouts to a minimum
and let technology take the strain.
Sustainable Packaging:
The trees used to make the card board for this box all come
from sensitively managed forests. Since 2006, the people that
made the cardboard for this box have planted over 700,000
acres of trees. On top of that, the whole manufacturing
process is ISO14001 approved.
Like to find out more? Visit www.GrownGreen.info
Responsible Transport:
This product was made in China. Most things are. But when
we brought it over here, we shipped it on a container ship,
along with 10,000 containers of other things. It may not be
fast, it takes about 4 weeks, but it's the greenest way of doing
it.
100% Recyclable:
All the cardboard in this packaging is 100% recyclable. If you
can't think of a good use for the box as it is, please fold it flat
and put it out with your other recycling. If you don't have
regular collections, it can be taken to any cardboard recycling
area or even used in your composter. Now you can play your
part!

Advertisement

loading