Table of Contents
Advertisement
EN
Connect your cables:
The LinkTheater must be connected to a TV or monitor.
Although the LinkTheater plays mp3s and other popular music
formats, a TV or monitor is required to navigate and configure
options on the LinkTheater.
There are many ways to connect the audio and video output
of the LinkTheater to a TV or home theater. The following
directions describe connecting your LinkTheater to your TV
or monitor with the standard yellow analog composite video
connector, which almost any TV will have. This cable is included
in your LinkTheater package and will work with most TVs.
Here's a simple way to connect your LinkTheater directly to a TV:
1 - Attach the included analog video cable to your TV or monitor.
Most TVs will have the connections color-coded: Yellow for
video, red for right-audio, and white for left-audio.
2 - Connect the other end of the analog video cable to the
associated ports on the LinkTheater. The ports are also color
coded: red for right audio, white for left audio, and yellow for
video.
3 - For a wired connection,connect the CAT-5 Ethernet cable into
the Ethernet port on the back of the LinkTheater and connect the
other end to a router, hub, or switch on your network.The LT-
H90WN provides added functionality allowing you to connect to
your network wirelessly. Please refer to the Wireless Connection
section for setup instructions.
6
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
