Stand alone configuration is made easy through 4 tact switches and ergonomic menu’s. To make the configuration of the DMHD01 ultra simple, a special software DMHDiface is available that you can download on our website: www.antiference.co.uk/conexer-hdmi-modulator and select the ‘downloads’ tab.
DMHD01 1 SAFETY CONSIDERATIONS 1.1 Connecting to the mains supply This product has to be connected to the mains supply. If there is the slightest doubt concerning the type of connection available on the installation, please contact your supplier of electricity. Before carrying out maintenance operation or modification of the installation, the modulator has to be disconnected.
DMHD01 2 - Description of the different elements Power supply input of the modulator (5 VDC / 4 A) USB input (for programming the DMHD01 by PC) '())*+,-. "/0 Ethernet connection RJ45 %&$"# !"#$"# RF input RF output HDMI input Component video input *%+(%',')&-$#, %&$'(")
DMHD01 2.1 - Using High Definition HD LCN In some systems you may want to broadcast a version of a programme in Standard Definition (SD) at the same time as High Definition (HD). With HD LCN numbering, you can force HD Television sets to follow the HD LCN numbering and SD Television sets to follow the LCN numbering for those programs which are transmitted in duplicate.
DMHD01 3.3 - Menu Structure The DMHD01 has different menus allowing easy access to the different parameters and to change them when necessary. Below you will find the structure of the different menus: In order to go from one menu to the other use the move up/down ( and ) keys to select the menu options.
DMHD01 4 Setting up the DMHD1 4.1 - Configuring the Menu In this menu you can set up your DMHD01 as IP Streamer, DVB-T modulator or DVB-C modulator. Select the appropriate option with the buttons and press the enter button to confirm. 4.2 - The DVB-T settings menu If the DMHD01 is configured as DVB-T modulator or DVB-C modulator, you can set in this menu the output frequency, bandwidth, output level and specific parameters for DVB-T or...
DMHD01 4.2.1 Setting the DVB-T parameters FREQUENCY BANDWIDTH ATTENUATION DVB-T When you select the DVB-T and press the enter button, the following submenu appears. It allows you to set the DVB-T parameters. • Set the Mode • Set the Constellation •...
DMHD01 4.3 - The IP setting Menu IP SETTINGS PROTOCOL IP ADDRESS UDP PORT When your DMHD01is configured as IP Streamer, then you can adjust the settings in the IP settings menu. • Set the UDP or RTP • Set the UDP Port nr. 4.4 The AV Settings menu A/V SETTINGS VIDEO SETTINGS...
DMHD01 4.4.2 Changing the AUDIO settings 4.5 The TS settings menu TS SETTINGS This menu allows you to adjust specific parameters of the transport stream. • Set the NIT version • Set the Network ID. • Set the Original Network ID. •...
DMHD01 • Set the Transport stream ID. • Set the Programme ID. • Set the LCN ID. • Set the LCN number • Set the HD LCN number • Set the Programme name • Set the VIDEO PMT • Set the VIDEO PID •...
0.6 kg 9 - Declaration of Conformity: We, ANTIFERENCE LIMITED herewith declare that the modulator CONEXER DMHD01 complies with all essential requirements and any other applicable conditions set forth on directive 1999/05/CE. According to the WEEE (Waste Electrical and Electronic Equipment) EU Directive, do not dispose of this product as household waste or commercial waste.
Need help?
Do you have a question about the Conexer DMHD01 and is the answer not in the manual?
Questions and answers