Protecting Images - JVC LYT0583-001A Instructions Manual

VIDEO/DSC Switch
(Open the LCD monitor
to access this switch.)
Display
D S C M E NU
1 R E T U R N
I N D E X
S L I D E S H O W
P R O T E C T
D E L E T E
F O R M A T
< >
EXIT PROTECT
01 02 03
04 05 06
Normal playback
< >
EXIT PROTECT
01 02 03
04 05 06
Normal playback
MENU/BRIGHT Wheel
Lock Button
Power Switch
Menu Screen
PROTECT Index
Screen
Padlock mark
If Protection is
removed

Protecting Images

The Protect mode helps prevent the accidental erasure of
images. When a padlock mark is displayed next to the
Picture Quality Mode indication, that image cannot be
deleted.
1
Set the VIDEO/DSC Switch to "
Power Switch to "
Lock Button.
•A stored image is displayed.
2
Press MENU/BRIGHT. The Menu Screen appears.
Rotate it to select "
appears.
3
Rotate MENU/BRIGHT to select "PROTECT" and
press it. The PROTECT Index Screen appears.
TO PROTECT AN IMAGE
Before doing the following, perform steps 1 through 3
above.
4
Rotate MENU/BRIGHT to move the green frame to
the desired image and press it. A "
appears on the selected image.
Repeat this procedure for all images you do not wish
to delete by accident.
5
Rotate MENU/BRIGHT upward to select "EXIT" and
press it. The normal playback screen appears.
NOTE:
When the memory is initialised or corrupted, even
protected images are deleted. If you do not want to lose
important images, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3
above.
4
Rotate MENU/BRIGHT to move the green frame to
the desired image and press it. The "
mark located above the image disappears and the
image is no longer protected.
Repeat this procedure for all images from which you
wish to remove protection.
5
Rotate MENU/BRIGHT upward to select "EXIT" and
press it. The normal playback screen appears.
EN
", then set the
" while pressing down the
" and press it. "DSC MENU"
" padlock mark
" padlock
37