Troubleshooting; Technical Specifications - Cambridge Audio one User Manual

Troubleshooting

There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
Check the unit is switched on via the back panel.
The player will not read the disc
Check the disc is not loaded upside down.
Check that the disc is not too scratched or dirty.
Check the disc type is suitable.
There is no sound
Ensure that the volume is set at an audible level.
Check that the speakers are connected correctly.
Check aerial connections and an available station is selected.
Check that the right source is selected.
Check the unit is not in mute.
The disc is skipping
Check that the disc is not too scratched or dirty.
Ensure the player is on a firm surface and not subject to vibrations.
The sound is distorted
Check aerial connections and placements.
Check the speaker connections.
The remote handset will not function
Check the polarity and that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
Perform a System Reset.
The unit does not pick up enough DAB stations
Check the aerial has strong signal.
Re-orientate the aerial.
Perform a System Reset.
The display on the unit is distorted
Perform a System Reset.
There is a hum coming from the speaker
Ensure that all cable connections are secure, particularly ground/shield
connections.
There is unwanted background noise and interference
Move the unit away from other electrical equipment that is likely to cause
interference.
Re-orientate the aerial.
In the event that the above solutions do not remedy your problem, please
consult our frequently asked questions (FAQ) section on our website:
www.cambridge-audio.com/sts/faqs
You can also use this facility to post a question to our Technical Support team. For
all servicing, in or out of warranty, please contact your dealer.
12

Technical specifications

D/A Converter
Power output
Frequency response (+0.5dB)
S/N ratio (A weighted)
Input impedances
THD+N (unweighted)
Tone control
Bass
Treble
Aerial input
DAB bands
FM bands
CD
Digital inputs
USB audio input
Compatibility
Other connections
USB charger current rating
Standby power consumption
Rated power consumption
Dimensions
Weight
Wolfson WM8728 24-bit/96kHz DAC
30 watts rms (into 8 Ohms)
40 watts rms (into 6 Ohms)
5Hz - 50kHz
>92dB relative to max output
47kohms
<0.02% @ 1kHz
<0.09% @ 20kHz
± 12dB @ 100Hz
± 10dB @ 10kHz
50 Ω FM/DAB
III/L
87.5 - 108 MHz
CD-DA/MP3/WMA/LPCM
CD playback is intrinsically limited to
16-bit 44.1kHz
S/PDIF Co-axial and TOSLink Optical
PCM 16-24-bit, 32-96kHz
USB Type B conforming to
Audio profile 1.0.
USB 1.0:
24-bit 32kHz, 44.1kHz, 48kHz, 96kHz
Toslink:
16/24-bit 32-96kHz
S/PDIF:
16/24-bit 32-96kHz
Bluetooth:
SBC
1 x 3.5mm headphone output
(32 To 600 ohms recommended)
1 x Sub Out
1 x IEC type mains inlet
5V 1A.
1W
300W
230 x 112 x 295mm
(9.0 x 4.4 x 11.6")
5.8kg (12.8lbs)