fier’s well-being - do not allow it to come into con- NTRODUCTION tact with water. Keep it away from potted plants to Thank you for choosing a Talk Electronics avoid those all-too-common watering accidents! To Tornado power amplifier. We are confident clean the amplifier’s case disconnect it from the wall...
pliers. Check this sort of connection periodically to IGNAL CONNECTIONS make sure that the wire is still tightly gripped. Better The Tornado Series was developed using high qual- still, use high quality cables factory fitted with appro- ity interconnects and speaker cables from Merlin priate plugs! The uppermost pair is for the left chan- Cables, these allow the amplifiers to operate as nel, whilst the bottom pair is for the right channel.
(allow at least 400mm for connections) Weight per unit unpacked 16.2kg Talk Electronics’ policy of continued research and development means that the above specification may change without notice. The Tornado has been manufactured to conform with the protection requirements of the EC Council directive 89/336/EEC...
Page 5
Post Code _______________________________ _________________________________________ E-mail address ____________________________ _________________________________________ Data Protection Act _________________________________________ Your details will be held by Talk Electronics Ltd. for promotional and statistical purposes. _________________________________________ ■ If you do not wish to receive marketing information please tick this box...
Need help?
Do you have a question about the Tornado 2.2 and is the answer not in the manual?
Questions and answers