Igniter Trouble-Shooting - Hearth and Home Technologies PS35 Service Manual

ECO CHOICE PELLET STOVE SERVICE MANUAL
1) TURN ON THE THERMOSTAT CIRCUIT AND MAKE SURE THE CALL LIGHT IS ON
2) CHECK FOR POWER AT THE IGNITER:
A. IF NO POWER------CHECK THE WIRE HARNESS OR REPLACE THE CONTROL BOX
B. IF POWER IS PRESENT-----REPLACE THE IGNITER

IGNITER TROUBLE-SHOOTING

CAUTION
Shock hazard.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Unplug cord before doing any checks or repairs.
• Do NOT touch wires while unit is plugged in.
PAGE 11