Table of Contents
Advertisement
2.1.5
AUX Input
The AUX inputs allow users to connect external audio/video devices such as mp3 device or
analog TV box. On the rear panel the AUX input in the cable kit allows connection to both
video and audio devices; on the front panel the AUX input allows connection to an audio
device only (see below figure).
2.1.6
CCD Camera
Follow the CCD connecting label to connect it, and you can enable the rear CCD camera.
Simply connect the CCD to the CCD-BACK (see Photo I) of the rear cable kit, and connect
the REAR TURN to the reversing switch of the car. So that the rear images of the car will
be shown on the display of VPC6500 automatically when the shift level is put into reverse
level.
Below are steps to connect a rear CCD camera:
1. Camera should be connect to "CCD-BACK" (Black RCA Connector as photo I)
2. Connect reversing switch "R" to "REAR TURN" (color: brown and white mixed)
(Photo I)
Note: If you are testing in lab, you may connect the "REAR TURN" (brown and white
mixed) wire to +12V wire (blue and white mixed).
VPC6500 Series Vehicle PC Hardware Manual A.3
X400
AUX1 can be
connected to video
or audio device.
AUX2 can be
connected to audio
device only.
20
Advertisement
Table of Contents
