Taillamps, Turn Signal; Stoplamps, And Back-Up; Lamps - Chevrolet 2013 Captiva Sport Owner's Manual

Chevrolet Captiva Sport Owner Manual - 2013 - crc 1st edition - 6/25/12
10-28 Vehicle Care
2. Turn the bulb to be replaced
counterclockwise to remove it
from the headlamp assembly.
3. Pull the bulb out of the bulb
socket assembly.
4. Push the new bulb into the bulb
socket assembly.
5. Insert the bulb assembly into the
headlamp assembly.
6. Turn the bulb assembly
clockwise until seated.
7. Reverse the steps to reinstall the
headlamp assembly.

Taillamps, Turn Signal,

Stoplamps, and Back-Up

Lamps

To replace one of these bulbs:
1. Back-Up Lamp
2. Turn Signal Lamp
3. Stoplamp/Taillamp
4. Taillamp
1. Open the liftgate. See Liftgate
on page 2 8.
Black plate (28,1)
2. Remove the two screws holding
in the taillamp assembly.
3. Slide the taillamp assembly
rearward and away from the
vehicle.
4. Turn the bulb socket being
replaced counterclockwise to
disconnect it.
5. Pull the bulb out of the bulb
socket.
6. Push the new bulb into the bulb
socket.
7. Reverse Steps 2 4 to reinstall
the taillamp assembly.