Panasonic Viera TC-L32E3L Operating Instructions Manual page 58

[Speaker Selection]
You can control the theatre speaker with this TV remote control by pointing at the TV's signal receiver.
•
If you cannot operate, check the settings and the equipment
"Summary of features", "Connection", "Preparations" (p. 55 - 56)
Access and control the speaker volume
MUTE
VOL
TV
Note
•
These functions may not work properly depending on the connected equipment.
•
Image or sound may not be available for the first few seconds when the Input mode is switched.
•
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or
Amplifier. Read the manual of the equipment.
•
"HDAVI Control 5" is the newest standard (current as of December, 2010) for HDAVI Control
compatible equipment. This standard is compatible with conventional HDAVI equipment.
•
To confirm this TV's version of HDAVI Control
58
- Speaker control
1
Display [VIERA Link Menu]
2
Select [Speaker Selection]
VIERA Link Menu
Recorder
VIERA Link Control
Speaker Selection Home Cinema
3
Set to [Home Cinema] or [TV]
set
[Home Cinema]
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically
turned on if it is in Standby mode and the sound is from theatre speakers
connected to the equipment.
•
Volume up / down
VOL
•
Mute
•
The sound of TV speakers is mute.
•
When the equipment is turned off, TV speakers will be active.
[TV]
TV speakers are active.
Multi-channel sound
•
If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch)
via an Amplifier, connect with HDMI cable and Optical digital audio
cable (p. 55), and then select [Home Cinema]. If your Amplifier has
"HDAVI Control 5" function, you can connect only with HDMI cable. In this
case, connect your Amplifier to the TV's HDMI1 terminal.
[System Information] (p. 28)
select