Page 2
Visit the advanced setup section for instructions or e-mail us at: info@gamutaudio.com inenT User manual – M3, M5 & M7 Speakers ®...
Page 3
Position the stripped wire onto the conical part of the terminal base and re-position the terminal nut onto the thread and turn the nut until it locks the wire. inenT User manual – M3, M5 & M7 Speakers ®...
Page 4
2 × 3 × by 7 by 5 divided by 3 divided divided by 7 by 5 by 7 Your measured width – write here Your measured length – write here inenT User manual – M3, M5 & M7 Speakers ®...
Page 5
By tilting the speaker towards the back, i.e. leaning more backwards, the speaker will be less aggressive or “laid back”. Fine trim the speaker tilt to optimize the midrange charac- ter. inenT User manual – M3, M5 & M7 Speakers ®...
Page 6
Length /5 The optimized low More high frequency; frequency speaker less toe-in / pointing location more directly to the ear The optimized Less high frequency; listening position more toe-in Width /7 inenT User manual – M3, M5 & M7 Speakers ®...
Page 7
When cleaning the speaker drivers, be sure not to apply excessive pressure, these are delicate items and bending or deforming the diaphragms will deteriorate the sonic performance, a soft brush without detergent is recommended. inenT User manual – M3, M5 & M7 Speakers ®...
Need help?
Do you have a question about the MinenT M3 and is the answer not in the manual?
Questions and answers