Advertisement
Super Feeder® Manual
Although these installation instructions are for the CSF-3 cat feeder, basic operation is the same for all Super
Feeders. Download a pdf version of the current manual at www.Super-Feeder.com. We strongly suggest watching
our video which will be extremely helpful for assembly and operation of the Super Feeder on our website:
http://www.super-feeder.com/video.html.
Table of Contents
Parts and Hardware ............................................ 2
Installation and Setup ....................................... 3
Stand Assembly Instructions ........................... 6
General Information .......................................... 7
Troubleshooting ................................................. 8
Warranty Information ..................................... 10
Email: info@super-feed.com
www.Super-Feeder.com
Find us on Facebook.
Revised August 7, 2013
Advertisement
Table of Contents
Summary of Contents for Super Feeder CSF-3
-
Page 1: Table Of Contents
Super Feeder® Manual Although these installation instructions are for the CSF-3 cat feeder, basic operation is the same for all Super Feeders. Download a pdf version of the current manual at www.Super-Feeder.com. We strongly suggest watching our video which will be extremely helpful for assembly and operation of the Super Feeder on our website: http://www.super-feeder.com/video.html. -
Page 2: Parts And Hardware
Super Feeder Parts and Hardware Lid - fits feeder, clear Feeder hardware bag contents (not for extensions and large stand and bowl assembly): 1.5 gallon (24-cup) black {shipped inside the feeder, hopper with CSF-3XL open lid to find bag} Small adjustment screwdriver... -
Page 3: Installation And Setup
Super Feeder Installation Fig. 1 Please view our video which will be extremely helpful for assembly and operation of the Super Feeder (http:// www.super-feeder.com/video.html). STEP 1 Install one clear extension on feeder and secure it with one small 3/16" screw and washer on back side only, opposite side of chute opening. - Page 4 Super Feeder Installation, cont. Fig. 5 for safety since it may be loose. Small loose parts may present a hazard for children and pets. Top view STEP 7 If you did not purchase the 1.5 gallon hopper, install Roller Slide the second clear extension onto the first extension and finish filling your feeder with dry food.
- Page 5 With wood stand or other mounts Fig. 11 For mounting the Super Feeder to a wood stand, use 2 large 1/2" head screws on each side (see Fig. 10). For mounting to a pole, bend the mounting ears on the “L”...
-
Page 6: Stand Assembly Instructions
Cat/Small Animal Stand Assembly Instructions Available separately or with combos Assembly Parts Note: Hardware bag shipped on back of tower 1 - Tower Bowl Placement 4 - Large Head Screws A: Gently squeeze the top portion of the feeder and 1 - Base tower so that the feeder will 8 - Small Black... -
Page 7: General Information
Thoroughly dry it and re-assemble the base while The Super Feeder is only approved for 9 to 24 volt AC holding the feeder upside down, making sure that the or DC. -
Page 8: Troubleshooting
Troubleshooting Problems with the assembly? Please view our video which will be extremely helpful for assembly and operation of the Super Feeder (www.Super- Feeder.com/videos). Unit does NOT run, does NOT run properly, 1. Confirm power light (steady green or blue depending on... - Page 9 Use extra strap or wire at upper part of upper extension (not Super Feeder Stand) and/or carefully drill and install longer screws all the way through extensions, or glue extensions with silicone sealant. Securely attach feeder! For more up to date info, go to www.super-feeder.com/troubleshooting...
-
Page 10: Warranty Information
Super Feeder that has failed through defect in material and/or workmanship (timers and power adapters shall only be warranted for a period of 90 days from date of purchase). Any external timer can be used. Warranty does not cover any Super Feeder® or accessory if it is being or has been used for any purpose other than its obvious original intent, has been damaged, altered, installed and/or operated contrary to instructions.
Need help?
Do you have a question about the CSF-3 and is the answer not in the manual?
Questions and answers