Page 3
(210ºC or 410ºF). When first using the TCS, it is advisable to begin with a lower temperature setting and gradually increase the heat setting to find the most suitable working temperature.
“airy” look - hair becomes tangle-free. FIR heat is able to close the cuticle layer and seal in moisture, creating a healthy, shiny and silky look. The Tourmaline Ceramic Styler (TCS) provides ultimate shine, colour and moisture retenti- on, and also eliminates static electricity so hair is left looking silky and frizz-free.
DO NOT touch the TCS ceramic plates after it has heated up. The high temperature could cause serious burns to skin. Only use the TCS to style real human hair. Do not use on artificial or animal hair. Do not use the heating plates to dry objects, and avoid any contact with the ceramic heating plates aside from human hair when the TCS is in operation.
Page 6
Seite 6 Do not use TCS on dripping wet hair. Do not use the mains that has higher voltage than the voltage specified on the TCS unit, user manual, or TCS box. Do not immerse TCS in water or rinse under running water cleaning, please refer to the “Cleaning &...
Page 7
Do not wind the power cord around the appliance. This might damage the cable thus increasing risk of danger. Do not place the TCS on paper or flammable surfaces but on a firm, flat and heat- resistant surface. Allow the TCS to cool down before storing away after use. Avoid any contact between the hot ceramic plates and the power cord.
IM_TCS_Ceramic_A5_sw.qxd 30.09.2005 11:43 Uhr Seite 8 Product Features of the TCS Tourmaline Coating: natural emitter of negative ions and far infrared heat; produces more negative ions than many regular ceramic hair irons. Far Infrared Heat (FIR): deep and penetrating infrared heat enables styling at the molecular level.
Seite 9 Operating Instruction Please read these operating instructions carefully before you begin using the TCS. In no event will the product sup- plier or manufacturer be liable for any special, incidental or consequential damages caused by incorrect operation. Such damages include, without limitation, loss of savings, income or revenue; loss of profit, loss of use; the claims of third parties and costs of any substitute equipment or services.
Step 6: When you get to the end, turn the TCS in a halfcircle inward. Hold the TCS for two (2)seconds and release (see Figure 1-2). Whichever technique you use, do not hesitate to repeat the process a few times for smooth, shiny and silky hair.
Figure 2-1 Step 6: Slowly glide the TCS forward from the hairline to the end of the hair section, and then let hair hang in front of your face. (see Figure 2-2) Note: Never stop for more than two (2) seconds at any one point on the section of hair being styled.
Step 6: When you get to the end, make a full turn outwards. Hold the TCS for two (2) seconds and release (see Figure 3-2). Whichever technique you use, do not hesitate to repeat the process a few times for smooth, silky and shiny hair.
Gently wind the section of hair around the TCS. (see Figure 4-2) Step 6: Slowly “roll” the TCS in the direction of a winding process (step 5) Note: Never stop for more than two (2) seconds at any one point on the section of hair being styled.
NOTE: Ionic hair brush sold separately. Storage Unplug the TCS from the power outlet. Allow it to cool down before storing away. Note: Avoid any contact between the hot ceramic plates and the power cord.
30.09.2005 11:44 Uhr Seite 15 Cleaning & Care To ensure the proper function and performance of your TCS, please clean the appliance regularly. Cleaning Instruction: Step 1: Firstly, ensure the power plug is disconnected from the mains and TCS has cooled down.
Page 16
IM_TCS_Ceramic_A5_sw.qxd 30.09.2005 11:44 Uhr Seite 16 Distributed by: Thane International, Inc., La Quinta, CA 92253 Thane Direct Canada, Inc., Toronto, ON Thane Direct UK Ltd., Admail 68, PI1 1AD www.thane.com...
Need help?
Do you have a question about the TCS and is the answer not in the manual?
Questions and answers