1. Manuals
  2. Brands
  3. ELiSS Manuals
  4. DVR
  5. LD-1600
  6. User manual

ELiSS LD-1600 User Manual

16ch color digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LeadTech
Crop.
ELiSS LD-1600
USER MANUAL
16CH Color Digital Video Recorder

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELiSS LD-1600 and is the answer not in the manual?

Questions and answers

Summary of Contents for ELiSS ELiSS LD-1600

  • Page 1 LeadTech Crop. ELiSS LD-1600 USER MANUAL 16CH Color Digital Video Recorder...
  • Page 2 Linux DVR System Copyright ⓒ 2003 LeadTech Corp. All rights reserved. The contents of this User’s Manual shall not be reproduced arbitrarily without prior approval. The product of this User’s Manual may be modified without advance notice for the reasons of upgrading, etc. The trademarks mentioned in this User’s Manual are registered trademark and unique trademark of each relevant company.
  • Page 3 Product specifications of ELiSS LD-1600 Repair of trouble and checking procedures, etc. of ELiSS LD-1600 The users who handle ELiSS LD-1600 are requested to pay attention to the matters to be noted after reading the User’s Manual prior to its use.

  • Page 4: Table Of Contents

    III . MAJOR FEATURES OF ELISS LD-1600................１１ IV . FUNCTION OF ELISS LD-1600 ..................１２ V . NAME AND FUNCTION OF EACH PART OF ELISS LD-1600......... １４ 1. Name and Function of Each Part of Front Operating Panel .......... １４...
  • Page 5 3.1. Explanation of Backup Method with LDV Extension ............. ４３ 3.2. Explanation of Backup Method with AVI Extension ............４５ 3.3. Method of Regeneration of Data in USB Hard disk in ELiSS DVR ....... ４８ IX . SETUP METHOD OF ELISS LD-1600 ................５０...
  • Page 6 Linux DVR System 1. Setup Mode .........................５０ 2. Input of Admin’s Password ....................５０ 2.1. Explanation of Admin’s Password Input Screen ............５０ 2.2. Method of Password Input ..................... ５１ 2.3. Conversion to Other Screen ..................５２ 3. Setup Mode Initial-Menu Screen ..................５３ 3.1.
  • Page 7 Linux DVR System 6. SETUP MODE-Color setup ....................７６ 6.1. SETUP MODE-Explanation of Color Setup Screen ............７６ 6.2. Explanation of Color Setup Method................７７ 7. SETUP MODE – Motion Recording Setup................ ７８ 7.1. Motion Recording......................７８ 7.1.1. Execution of Motion Recording ...................７８ 8.
  • Page 8 14.3.2. Control of ZOOM......................１１７ 14.3.3. Control of FOCUS......................１１８ 14.3.4. Control of LIGHT......................１１８ 14.3.5. Control of Power ......................１１９ X . PRODUCT SPECIFICATIONS FOR ELISS LD-1600 ............ １２０ XI . TROUBLESHOOTING GUIDE ..................１２１ X . QUALITY WARRANTY ....................１２３ ８ LeadTech...

  • Page 9: Matters To Be Noted

    When installing this product, maintain approximately 15cm of distance from other nearby equipment. Be careful not to apply impact or shaking when ELiSS LD-1600 is moved or in operation. Do not install at the place where there is strong magnetism or radio wave.

  • Page 10: Composition Of Eliss Ld-1600 Product

    Linux DVR System II . Composition of ELiSS LD-1600 Product Unpack the packaging of ELiSS LD-1600 and place ELiSS LD-1600 at the place to install. (Refer to installation safety information before the installation.) Check the contained material of the product before the installation.

  • Page 11: Major Features Of Eliss Ld-1600

    Linux DVR System III . Major Features of ELiSS LD-1600 1. Accepted all merits of Window type DVR and Stand-Alone type DVR/removed demerits 1.1. Easiness of Operation Since the product is operated by button panel without using keyboard/mouse, the operating system is simple and intuitive, and anyone can easily operate.

  • Page 12: Function Of Eliss Ld-1600

    Linux DVR System IV . Function of ELiSS LD-1600 Overlay Mode ＊ MODE General search Search Mode Event search Password Password re-setup General setup Channel switching Rebooting Date setup ID (Camera No) Frame rate Storage status PTZ type/ID Storage Storage status...
  • Page 13 Linux DVR System Use of DHCP Network setup Net Mask Gateway Port Number of simultaneous users Network image quality (Select up to 1~5) ＊ SETUP Setup Sensor Storage continuous-time setup Storage Camera setup Alarm (Select up to ALARM 1~4) Alarm Setup Continuous time Parallel port setup...

  • Page 14: Name And Function Of Each Part Of Eliss Ld-1600

    Linux DVR System V . Name and Function of Each Part of ELiSS LD-1600 1. Name and Function of Each Part of Front Operating Panel Name of Operating Function Button ① USB Port - Terminal for USB connection ② 리모콘 센서...

  • Page 15: Name And Function Of Each Part Of Rear Side Connection Terminal

    Linux DVR System 2. Name and Function of Each Part of Rear Side Connection Terminal VI . Name of Connection Terminal Function ① Power AC 100V ~ 240V, 50/60Hz ② CAM01~CAM12 Camera input terminal(12ch) ③ SENSOR INPUT Terminal receiving input of 16 sensors. ④...

  • Page 16: Method Of Installing Eliss Ld-1600

    Linux DVR System VII . Method of Installing ELiSS LD-1600 1. Composition Drawing of Entire Rear Side １６ LeadTech...

  • Page 17: Method Of Use Of Eliss Ld-1600

    VIII . Method of Use of ELiSS LD-1600 1. Power ON/OFF of ELiSS LD-1600 Power of DVR must be turned ON after all installation of ELiSS LD-1600 is completed. Check the voltage of input power before turning ON power switch. Using after converting power conversion switch on the rear side of ELiSS to the matching voltage.

  • Page 18: Display Mode(Monitor Mode)

    2. DISPLAY MODE(Monitor Mode) DISPLAY MODE(Monitor Mode) performs the function of showing the image in real time and moving image relayed through installed camera. When power of ELiSS LD-1600 turns ON, the user enters into Display Mode Screen. 2.1. Explanation of DISPLAY MODE Screen ③...

  • Page 19: Explanation Of Contents Displayed On Each Screen (The Case When Osd Setting Is On)

    Linux DVR System 2.2. Explanation of Contents Displayed on Each Screen (The case when OSD setting is ON) SETUP-In general setup, when you change OSD setup to ON, setup value by each camera channel is displayed on the screen. The contents displayed on the screen are as follows. SETUP-When you change OSD setup to OFF in general setup, the following contents are not displayed on the screen.

  • Page 20: Conversion To Display Mode From Other Mode

    Linux DVR System Indication of Motion Sphere : When moving is sensed in the set area while in setup as ③ motion storage, sensed area is changed to blue color. (Refer to Motion setup on p.68: 5.8..) ※ In camera setup, if Display of Motion Setup is set to OFF, no sphere indication is shown on the screen.

  • Page 21: Change Of Screen Dividing From Display Mode

    Linux DVR System 2.4. Change of Screen Dividing from Display Mode You can change screen dividing mode by using DIV button. Each one pressing of DIV button converts the screen in the order of 16-division screen → 13-division screen → 9- division screen →...

  • Page 22: Automatic Channel Switching Function And Tv Out

    When common analog TV is connected to TV OUT terminal at connection terminal in the rear side of ELiSS LD-1600, same TV screen as the screen of ELiSS LD-1600 is output. Setup of channel switching is equally applied to TV OUT screen.

  • Page 23: Conversion Of Camera Channel From Screen Divided Into 8

    Linux DVR System 2.7.1. Conversion of Camera Channel from Screen Divided into 9 Firstly, set the division of the screen to the screen divided into 9 using DIV button. To convert camera channel which is shown on the screen, use ▲/▼button among Direction Movement buttons.

  • Page 24: Conversion Of Camera Channel From Screen Divided Into 4

    Firstly, set division of the screen to the screen divided into 8 by using DIV button. To convert camera channel shown on the screen, use ▲/▼button among Direction Movement buttons in case of EliSS LD-1600. ▲button increases (+) channel of the camera and ▼button decreases (-) channel of the camera.
  • Page 25 Firstly, set division of the screen to the screen divided into 4 by using DIV button. To convert camera channel shown on the screen, use ▲/▼button among Direction Movement buttons in case of ELiSS LD-1600. ▲button increases (+) camera channel and ▼button decreases (-) camera channel..

  • Page 26: Conversion Of Camera Channel From Full Screen

    Firstly, set division of the screen to Full screen by using DIV button. To change camera channel shown on the screen, use ▲/▼button among Direction Movement buttons in case of ELiSS LD-1600. ▲button increases (+) camera channel and ▼button decreases (-) camera channel.

  • Page 27: Real Time Storage In Display Mode

    Linux DVR System 2.8. Real Time Storage in DISPLAY MODE In ELiSS LD-1600, you can make real time storage in monitor mode. To do that, use ●REC button located on the front side of ELiSS LD-1600 in DISPLAY MODE screen.

  • Page 28: Search Mode(Retrieval Mode)

    Search Mode is a mode that can search/regenerate recorded image by date, by time. It is converted to Search Mode when pressing MODE button of front side of ELiSS from Display Mode. Search method has General Search and Event Search.

  • Page 29: General Search

    ① ① Place cursor at general search button using ▲/▼ button among Direction Movement buttons located in the front side of ELiSS. When cursor is placed, general search button is lit with red light from blue light. ② When the general search button shines with red light, press again ▶ button among Direction Movement buttons located in the front side of ELiSS.

  • Page 30: Regeneration Of Generally Searched Data

    ① Indicates present mode. Present mode is SEARCH MODE. ② Sphere where recorded data of searched time/date is regenerated. To change the division of screen, press DIV button located at front side of ELiSS. Division of screen is changed by each 1 pressing.

  • Page 31: Explanation Of Contents Displayed On Each Regeneration Screen

    Linux DVR System ⑥ Display present regenerating status of recorded data by icon. Displayed in red color according to reproducing status. If this icon is displayed i n red color, it means that recorded data ⓐ ⓐ are being regenerated at right direction and right speed. ⓑ...

  • Page 32: Change Of Screen Division Of Search Mode

    3.2.5. Change of Screen Division of Search Mode In order to change screen division, DIV button is used located on front side of ELiSS in same manner as Display Mode. Screen division is changed in the order of screen divided to 16 →...

  • Page 33: Conversion Of Camera Channel From Search Mode

    Linux DVR System 3.2.6. Conversion of Camera Channel from Search Mode This function is to watch camera channel which is not watched at present in 9-division screen/4-division screen/Full screen mode. In order to convert camera seen on the screen, use ▲/▼button among Direction Movement buttons in the same way as channel conversion. ▲button increases (+) camera channel and ▼button decreases (-) camera channel.

  • Page 34: Explanation Of Regeneration Function Button

    Linux DVR System 3.2.7. Explanation of Regeneration Function Button This is to explain on regeneration function button located on the front side of ELiSS. ① Regenerates in the right direction at fast speed. ② Regenerates in the right direction at normal speed.

  • Page 35: Event Search

    ③ Displays camera No. for event search. Camera No. can be changed by the user. ④ Displays time/date of search. Time/date of search can be changed by the user using Direction Movement button located on the front side of ELiSS. ⑤ This is a window that shows concerned time/date and event searched data on concerned camera in the form of list.

  • Page 36: Method Of Event Search

    ⑤ ① Position the cursor to event search using ▲/▼ button among Direction Movement buttons located on the front side of ELiSS between General Search and Event Search. When cursor is positioned, red light is lit on event search. ② After selecting Event Search, when you press ▶ button among Direction Movement buttons located on the front side of ELiSS, cursor appears in the camera channel selection window desired to search.

  • Page 37: Regeneration Of Event-Searched Data

    ⑤ When search time/date setting is completed, press ENTER button located on the front side of ELiSS. If searched data exist, the data are shown in the form of list. Move cursor to desired data using ▲/▼button among Direction Movement buttons. Move of cursor is displayed in red color.

  • Page 38: Search Mode-Jpeg Backup

    ③ Indicate the screen of the target camera as 1 channel mode by using camera number from No. 1 to 16 located on the front side of ELiSS LD-1600. ④ If you press Regeneration (▶)button once again from the status in which searched screen is being regenerated, it stops tentatively.

  • Page 39: Backup Of Stored Data

    ※ PEG Backup is possible in SEARCH MODE, and refer to P.38 : 3.4 SEARCH MODE-JPEG Backup. For backup of stored data, use BACKUP button located on the front side of ELiSS LD-1600. USB PORT When pressing BACKUP button from DISPLAY MODE and SEARCH MODE, it is converted to BACKUP MODE, and BACKUP MODE has two screens.

  • Page 40: Explanation Of Backup Initial-Screen

    ⑤ Storage is possible in two types. : When Storage is selected, backup can be done with ldv extension which is the type that can regenerate in ELiSS LD- 1600, and enters into backup progress screen. : When Storage(AVI Conversion) is selected, backup can be...

  • Page 41: Explanation Of Backup Progress Screen

    ① ① Indicates present mode. Present mode is BACKUP MODE. ② This is a window showing data information inside ELiSS LD-1600 Hard disk. If stored data exist in ELiSS-1600 on set date from backup initial-screen, the data appear as one list.
  • Page 42 Linux DVR System ⑤ This is a window indicating data information in USB hard disk. If you selected on the backup initial-screen, all data list of “idv” format appears, and if you selected ‘AVI Storage’, all data list of “avi” format appears. If quantity of list exceeds one screen, scroll bar appears in the right side of window.

  • Page 43: Explanation Of Backup Method Of Stored Data

    When pressing ENTER button, BACKUP Progress screen where Backup is possible with ldv extension appears. When entering into BACKUP Progress screen, the list of data contained in USB Hard disk connected with ELiSS LD-1600 Hard disk is generated. ４３ LeadTech...
  • Page 44 ⓔ ⓒ ⓐ ⓓ Select the data to backup to USB hard disk among data list inside ELiSS LD -1600 Hard ⓐ disk. Selection of data is done by pressing ENTER button after moving cursor to data to backup. Use ▲/▼button among Direction Movement buttons for the move of cursor.

  • Page 45: Explanation Of Backup Method With Avi Extension

    Linux DVR System 3.2. Explanation of Backup Method with AVI Extension Method of backup with avi extension is also same as the method of backup with ldv extension. However, button must be selected when selecting Storage Mode. ※ However, ldv backup can backup several files at same time, and avi backup can convert or backup a file of 1 hour into avi file after dividing it into 5 minutes unit.
  • Page 46 ⓔ ⓒ ⓐ ⓓ Select one list to backup in USB hard disk among data list inside ELiSS LD -1600 Hard ⓐ disk. Selection of data is done by pressing ENTER button after moving cursor to data to backup. Use ▲/▼button among Direction Movement buttons for the move of cursor.
  • Page 47 12 from 00 to 55 using ◀ , ▶ button, and when the user press ENTERE button on the front side of ELiSS LD-1600 at desired column, the floppy disk image which means ‘selected’ appears. If you press once more from this status, ‘ㅡ’...

  • Page 48: Method Of Regeneration Of Data In Usb Hard Disk In Eliss Dvr

    Linux DVR System 3.3. Method of Regeneration of Data in USB Hard disk in ELiSS DVR By moving the data in the USB hard-disk stored by ldv extension to the inside of hard-disk of ELiSS DVR., regeneration is possible in ELiSS LD-1600.
  • Page 49 If ‘Yes’ is selected by pressing ENTER button, the window showing backup progressing status appears. ④ When the data inside USB Hard-disk is moved to ELiSS LD-1600, the data moved to the inside of ELiSS LD-1600 Hard-disk is displayed in the form of list.

  • Page 50: Setup Method Of Eliss Ld-1600

    Linux DVR System X . Setup Method of ELiSS LD-1600 1. Setup Mode When SETUP button is pressed from DISPLAY MODE or SETUP MODE, conversion to SETUP MODE is done, and the Manager’s Password Input screen appears first. 2. Input of Admin’s Password 2.1.

  • Page 51: Method Of Password Input

    2.2. Method of Password Input ① To input password, Camera Select button among the buttons located on the front side of ELiSS LD-1600 are used. No. 10 channel button is ‘0’ at the time of password input. ② For every 1 input of password by admin, 1 * mark is affixed on password input window.

  • Page 52: Conversion To Other Screen

    If the password is incorrect, start input again from the beginning. 2.3. Conversion to Other Screen ① When the password is unknown, use CANCEL button on front side of ELiSS LD-1600 to convert to other screen. ② When CANCEL button is pressed, the screen is converted to 16-division Display Mode screen.

  • Page 53: Setup Mode Initial-Menu Screen

    Linux DVR System 3. Setup Mode Initial-Menu Screen 3.1. Explanation of Setup Mode-Initial Menu Screen ③ 2003-11-19 pm 09:27 ② ④ ③ ③ ① Indicates present mode. Present mode is Setup Mode. ② Indicates present time. ③ These are menus that can be set from Setup Mode. ④...

  • Page 54: Selection Of Menu From Setup Mode

    ③ To change the position of cursor, use ◀/▶ button or ▲/▼ button located on front side of ELiSS LD-1600. When pressing ◀ button, cursor moves to the left. When pressing ▶ button, cursor moves to the right.

  • Page 55: Setup Mode - General Setup

    Linux DVR System 4. Setup Mode – General Setup The menus that can be set from General Setup are password setting, channel switching, OSD, rebooting, date setting. 4.1. Setup Mode – Explanation of General Setup Screen ② ① 2003-11-19 pm 09:27 ④...

  • Page 56: Setup Mode - Selection Of General Setup Menu

    ② When yellow light is lit on the menu intended to set up, if you press ▶ among Direction Movement buttons located on the front side of ELiSS LD-1600, yellow light is lit around the rim of setup window that shows present setup value in the right side of concerned menu, and cursor appears in the first column.

  • Page 57: Changing Password

    Linux DVR System 4.3. Changing Password This is the menu for the change of password of manager. Basic setup is ‘0000’. ① Cursor is moved with password among general setup menu. Move cursor using ▲ /▼button among Direction Movement buttons. Concerned menu shines with yellow light.

  • Page 58: Channel Switching Setup And Tv Out

    Linux DVR System 4.4. Channel Switching Setup and TV OUT Channel switching function is the function that automatically converts camera channel seen on the screen when the screen is 13-division screen, 9-division screen, 8- division screen, 6-division screen, 4-division screen and full screen. If time interval of channel switching is set up, camera channel of screen is automatically converted at set time interval.

  • Page 59: Osd Setup

    Linux DVR System 4.5. OSD Setup OSD sets whether or not to display the information such as camera ID and sensor, Pantilt camera setting, storage status, etc. on displaying screen. ① Move cursor to OSD among general setup menu. Use ▲/▼button for the move of cursor.

  • Page 60: Setup Of Rebooting

    Linux DVR System 4.6. Setup of Rebooting This is a menu for regular rebooting of the system. If you don’t want to do rebooting, set the value to 0 second. Basic setup is set as 0 hours 60 days. ① Move the cursor to rebooting among general setup menu. Use ▲/▼button for the move of cursor.

  • Page 61: Date Setup

    Linux DVR System 4.7. Date Setup Date Setup is a menu to set correct time when the date of time of system is incorrect. When time is newly set, all of the stored data are deleted. Basic setup is current time of the system.

  • Page 62: Movement To Initial Menu Screen Of Setup Mode From General Setup Screen

    In order to move again to initial menu screen of Setup Mode from general setup screen, conversion is made by pressing ENTER button or CANCEL button located on the front side of ELiSS LD-1600 from the top stage of general setup, ①...

  • Page 63: Setup Mode - Camera Setup

    Linux DVR System 5. Setup Mode – Camera Setup The menus that can be set in camera setup are camera ID, Frame rate, Video type, PTZtype / camera ID, storage status, Motion sensitivity setup, Motion continuous time, compressed picture quality, alarm, resolution. 5.1.

  • Page 64: Setup Mode - Designation Of Camera From Camera Setup Initial-Screen

    Linux DVR System 5.2. Setup Mode – Designation of Camera from Camera Setup Initial-Screen ① When camera setup menu is selected from initial menu screen of Setup Mode, first cursor is positioned at No. 1 camera (CAM01). Yellow light is lit on the camera where the cursor is positioned.

  • Page 65: Changing Camera Id

    Linux DVR System 5.3. Changing Camera ID User can change ID of camera at user’s own discretion to enable easy classification of camera. Basic setup is set for ‘CAM+Camera No. ① Move cursor with ID among camera setup menu. ▲/▼button among Direction Movement buttons is used for the move of camera.

  • Page 66: Setup Of Frame Rate

    Linux DVR System 5.4. Setup of Frame Rate This is a menu to set up the number of frame stored in each 1 second. A maximum up to 15frame can be set up. Basic setup is set for 10fps. ① Move cursor with Frame rate among Camera Setup Menu. ▲/▼button among Direction Movement buttons is used for the move of cursor.

  • Page 67: Setup Of Video Type

    Linux DVR System 5.5. Setup of Video type This is a menu for the setup of the type of analog signal entering through camera. At present, only NTSC is supported. ① Move cursor with Video type among Camera Setup menu. ▲/▼button among Direction Movement buttons is used for the move of cursor.

  • Page 68: Setup Of Ptz Type / Id

    Linux DVR System 5.6. Setup of PTZ Type / ID This is a menu to setup type and ID of Pantilt camera among the camera. Basic setup is set to ‘NO PANTILT’, and ‘00’ is set for ID as the basic setup. ①...

  • Page 69: Setup Of The Status Of Recording

    Linux DVR System 5.7. Setup of the Status of Recording Status of recording can be set up by each camera. There are ‘Recording’, ‘No Recording’, ‘Schedule’ in the status of recording. ‘Recording’ means intending entire recording, ‘No Recording means not to store. ‘Schedule’ means to store as the schedule set up in recording schedule of Setup Mode.

  • Page 70: Setup Of Motion

    Linux DVR System 5.8. Setup of Motion Set the storage status of camera setup to ‘Schedule’, and execute Motion Storage in case when motion storage was set from Setup Mode – Schedule. Motion sensitivity setup is the menu for the setup of degree of reaction when there is any motion in setup sphere.

  • Page 71: Setup Of Motion Continuance Time

    ③ When ON/OFF setting of Motion Sphere Display is completed and press ENTER button, yellow light around Setup window is turned off and the cursor inside Setup window also disappears. ※ When Overlay board was used in ELiSS LD-1600, no motion sensing sphere can be displayed in DISPALY MODE. ７１...

  • Page 72: Setup Of Compressed Image Quality

    Linux DVR System 5.9. Setup of Compressed Image Quality This is a menu for the setting of image quality of data being stored. Setting can be done from 1 to 5, and 5 is the best image quality. File size is in proportion to the image quality.

  • Page 73: Setup Of Alarm

    Linux DVR System 5.10. Setup of Alarm This is a menu to ring Alarm when movement in set sphere is sensed at Storage Schedule of SETUP MODE. User can select one among 4 alarms. Basic setting is set to OFF. (Refer to p.104: 12.

  • Page 74: Setup Of Resolution

    Linux DVR System 5.11. Setup of Resolution Resolution by each camera channel can be changed at the discretion of the user. Since the resolution influences storage capacity, resolution may be set differently depending on the importance of each camera channel. Basic setting is 320x240. ①...

  • Page 75: Movement To Initial Menu Screen Of Setup Mode From Camera Setup Screen

    Linux DVR System 5.12. Movement to Initial Menu Screen of Setup Mode from Camera Setup Screen To move again to Initial Menu screen of Setup Mode from Camera Setup screen, conversion is made by pressing ENTER button or CANCEL button after going to the designated screen of the camera by pressing ENTER button.

  • Page 76: Setup Mode-Color Setup

    Linux DVR System 6. SETUP MODE-Color setup User can select color the value of Capture screen and the value of Overlay screen, respectively. The menus that can be set up from Color Setup are BRIGHTNESS, CONTRAST, SATURATION, HUE. 6.1. SETUP MODE-Explanation of Color Setup Screen ③...

  • Page 77: Explanation Of Color Setup Method

    Linux DVR System 6.2. Explanation of Color Setup Method User can set each respective value of BRIGHTNESS / CONTRAST / SATURATION / HUE of Capture screen and Overlay screen. ① After moving cursor to MENU, Capture and Overlay can be selected using ◀/▶button among Direction Movement buttons.

  • Page 78: Setup Mode - Motion Recording Setup

    Linux DVR System 7. SETUP MODE – Motion Recording Setup 7.1. Motion Recording Motion Storage starts the storage when the movement is sensed in the sphere after designating a sphere on the screen. User can know the execution of motion storage of concerned camera by the display of motion storage initial (M) on the screen.
  • Page 79 Linux DVR System ④ If cursor moves to Storage status, yellow light is lit on ‘Storage Status’. ⑤ When pressing ▶button among Direction Movement buttons, yellow light is lit on the rid of setup window that shows present setup value of concerned menu. ⑥...
  • Page 80 ⑪ If the user does not use Overlay board in ELiSS LD-1600, the user can set up Motion sphere DISPLAY ON/OFF. To set up Motion sphere DISPLAY ON/OF, move cursor to Display by pressing ▶button among Direction Movement buttons.

  • Page 81: Setup Mode - Motion Recording Sphere Setup

    Motion Sphere Setup screen. 8.1. Explanation of Motion Sphere Setup Screen ELiSS LD-1600 can setup motion sensing sphere by each camera channel. If motion sensing sphere is set up, storage is executed when the movement is detected by the set sphere.

  • Page 82: Setup Method Of Motion Sensing Sphere

    Linux DVR System 8.2. Setup Method of Motion Sensing Sphere ① Select camera to setup Motion Sensing Sphere. When first ① entering into Motion Sensing Sphere Setup screen, cursor is placed in CAM01. Use ▲/▼button among Direction Movement buttons for the move of cursor. When cursor is placed, yellow light is lit.
  • Page 83 Linux DVR System ③ Designate as Motion Sensing Sphere at the part not set up as Motion Sensing Sphere by pressing ENTER button. If designated as Motion Sensing Sphere, such part is seen as green color at the beginning, and seen as blue color when cursor moves.
  • Page 84 Linux DVR System ⑤ At upper side and left side of the screen where Motion Sensing Sphere is set up, image bar is located which was divided into 8 each column. If you press ENTER button with cursor placing on this image bar, setting of one lower line (or right side line) of the relevant column is changed.

  • Page 85: Movement To Initial Menu Selection Screen Of Setup Mode From Motion Setup

    Linux DVR System ⅲ) Setup of entire screen Press ENTER button placing the position of cursor on the intersection column of horizontal line and vertical line of image bar. Motion Sphere Setup is cancelled when ENTER button is pressed once more. <Sphere Setup view>...
  • Page 86 Linux DVR System ② CANCEL button means converting to initial menu screen of Setup Mode maintaining existing value without storing newly set value. When the user presses CANCEL button from the top stage even if the user pressed ENTER button from the lower stage, the new value set by the user is not stored and the existing value is maintained.

  • Page 87: Setup Mode - Schedule

    Linux DVR System 9. SETUP MODE – Schedule Schedule sets up the schedule stored at the time when storage status is set to schedule at Camera Setup by each camera. The menus that can be set up at Storage Schedule are Storage Schedule Setup and Schedule Application Scope Setup. 9.1.

  • Page 88: Setup Mode - Designation Of Camera At Schedule Setup Screen

    Linux DVR System 9.2. SETUP MODE – Designation of Camera at Schedule Setup Screen ① If you select and enter the initial screen of Storage Schedule from initial screen of Setup Mode, cursor is placed in No. 1 camera (CAM 01). The camera in which cursor is placed shines with yellow light.

  • Page 89: Method Of Schedule Setup

    Linux DVR System 9.3. Method of Schedule Setup When storage time is set up at storage menu of storage schedule and set the storage status to ‘Schedule’, concerned camera does entire storage according to set schedule. The user can identify the execution of entire storage by concerned camera by the display of entire storage initial (R) on the screen.
  • Page 90 Linux DVR System ⅱ) Change of schedule setup of vertical line (time) When ENTER button is pressed after setting intended cursor to Time, change of concerned time setting of the weekday is possible at the same time. For every pressing of ENTER button, setup is changed in the order of ‘Entire storage→Motion storage→...

  • Page 91: Setup Of Application Scope Of Schedule

    Linux DVR System ④ When all setting is completed, move the cursor to the left side and exit from the window using ◀ button among Direction Movement buttons. 9.4. Setup of Application Scope of Schedule ① When pressing ▼button among Direction Movement buttons once more, scope of schedule can be set up.

  • Page 92: Setup Mode - Network Setup

    Linux DVR System 10. SETUP MODE – Network Setup ELiSS LD-1600 provides real-time remote monitor function through network. Real-time image transmission from remote place, search and backup of recorded data, multi- channel interface, ‘multi-to multi’ interface are possible. In network setup, method of interface and setup of low order menu incidental thereto is possible.

  • Page 93: Setup Of Dhcp (Method Of Ip Address Setup)

    Linux DVR System 10.2. Setup of DHCP (Method of IP Address Setup) When DHCP is used, the system, not the user, automatically setup IP, Net Mask, Gateway, etc. If DHCP is not used, the user can personally setup IP, Net Mask, Gateway, etc.

  • Page 94: Change Of Ip Setup Value

    Linux DVR System 10.3. Change of IP Setup Value This is the menu to personally setup IP of ELiSS LD-1600 when ‘DHCP Setup’ is set for ‘Not use’. Basic setup is set to 192.168.000.098. ① When cursor is moved to IP among network setup menu, yellow light is lit. For move of cursor, ▲/▼button among Direction Movement buttons on the front...

  • Page 95: Change Of Net Mask Setup Value

    Linux DVR System 10.4. Change of Net Mask Setup Value This is the menu to set up Net Mask of ELiSS LD-1600 when ‘DHCP setup’ is set to ‘Not use’. Basic setup is set to 255.255.255.000. ① When cursor is moved to Net Mask among network setup menu, yellow light is lit.

  • Page 96: Change Of Gateway Setup Value

    Linux DVR System 10.5. Change of Gateway Setup Value This is the menu to setup Gsteway of ELiSS LD-1600 when ‘DHCP Setup’ is set to ‘Not use’. Basic setup is set to 192.168.000.254. ① When cursor is moved to Gateway among network setup menu, yellow light is lit.

  • Page 97: Change Of Port Setup Value

    Linux DVR System 10.6. Change of Port Setup Value This is the menu to setup Port No. of ELiSS LD-1600 when ‘DHCP’ is set to ‘Not use’. Basic setup is set to 05005. ① When cursor is moved to Port among network setup menu, yellow light is lit. ▲/ ▼button among Direction Movement buttons is used for the move of cursor.

  • Page 98: Change Of Setup Value Of The Number Of Simultaneous Users

    10.7. Change of Setup Value of the Number of Simultaneous Users This is the menu to set the number of users who can interface simultaneously with ELiSS LD-1600 in EyeLinker (remote place). Basic setting is set to 06 persons. ①...

  • Page 99: Change Of Setup Value Of Network Image Quality

    Linux DVR System 10.8. Change of Setup Value of Network Image quality This is the menu for user’s selection of image quality of the screen transmitted by EyeLinker (Remote place). Basic setting is set to 01. ③ When cursor is moved to the ‘Network image quality’ among network setup menu, yellow light is lit.

  • Page 100: Movement To Menu Selection Initial-Screen Of Setup Mode From Network Setup Screen

    Linux DVR System 10.9. Movement to Menu Selection Initial-Screen of Setup Mode from Network Setup Screen To return to initial menu screen of Setup Mode after completing all setup on Network Setup Screen, press ENTER button or CANCEL button. ① ENTER button means to convert to Setup Mode initial menu screen after storing newly set value ②...

  • Page 101: Setup Mode - Sensor Setup

    Linux DVR System 11. SETUP MODE – Sensor Setup At Sensor Setup Menu, setup, continuance time, storage and alarm are set up. 11.1. SETUP MODE-Sensor Setup Screen ③ ② ⑤ ⑥ ④ ① ① Indicates present MODE. Present Mode is SETUP MODE. ②...

  • Page 102: Method Of Designation Of Sensor Intended To Set Up

    Linux DVR System 11.2. Method of Designation of Sensor Intended to Set up ① When entering to sensor setup screen after selecting sensor at initial menu selection screen of SETUP MODE, first cursor is located at No. 1 (SEN 01) sensor among the sensors..

  • Page 103: Change Of Setup In Sensor Menu

    Linux DVR System 11.3. Change of Setup in Sensor Menu This is the menu to select the kind of sensor. Selection is possible between N/C (Normally Close) and N/O (Normally Open). Basic setup is set for N/O (normally Open). ④ Move cursor to Setup among Sensor Menus. ◀/▶button among Direction Movement buttons is used for the move of cursor.

  • Page 104: Setup Of Recording Continuance Time

    Linux DVR System 11.4. Setup of Recording Continuance Time When event happened to the sensor, the time to store the screen of camera must be set. Basic setting is 3 seconds. ① Move the cursor to storage continuance time among sensor menu. ▲/▼button among Direction Movement buttons is used for the move of cursor.

  • Page 105: Setup Of Recording (Camera)

    Linux DVR System 11.5. Setup of Recording (Camera) This is the menu to set up camera which assume storage when the event happened to concerned sensor. Basic setting coincides between the sensor No. and the No. of camera to assume storage. ①...

  • Page 106: Alarm Setup

    Linux DVR System 11.6. Alarm Setup This is the menu to set up the alarm which reacts when event happened to concerned sensor. Basic setting is ALARM01. ALARM has 01~ 04. ① Move the cursor to alarm time among sensor menu. ▲/▼button is used for the move of cursor.
  • Page 107 Linux DVR System ② CANCEL button means converting to initial menu screen of Setup Mode maintaining existing value without storing newly set value When the user presses CANCEL button from the top stage even if the user ENTER button from the lower stage, the new value set by the user is not stored and the existing value is maintained.

  • Page 108: Setup Mode - Alarm Setup

    Linux DVR System 12. SETUP MODE – Alarm Setup SETUP MODE – The functions selectable from alarm mode are selection and continuance time. 12.1. Explanation of Alarm Setup Screen ② ③ ⑤ ⑥ ④ ① ① Indicates present mode. Present MODE is SETUP MODE. ②...

  • Page 109: Designation Of Alarm To Be Set Up

    Linux DVR System 12.2. Designation of Alarm to be Set up ① When entering to alarm setup screen from initial menu screen of SETUP MODE, cursor is located at No. 1 Alarm (ALARM 01) among Alarm Designation Menu. Yellow light is lit on the alarm on which the cursor is located.

  • Page 110: Change Of Setup In Alarm Menu

    Linux DVR System 12.3. Change of Setup in Alarm Menu This is the menu to select the kind of alarm. Selection is possible between N/C (Normally Close), N/O (Normally Open). Basic setting is set to N/O(Normally Open). ① After designating the alarm to change the setting, move cursor to Setup among Alarm Menus.

  • Page 111: Setup Of Alarm Continuance Time

    Linux DVR System 12.4. Setup of Alarm Continuance Time This is the menu to set up the time of ringing of alarm. Basic setting is set to 3 seconds. ① Move cursor to continuance time among Alarm Menu. Use ▲/▼button among Direction Movement buttons for the move of cursor.
  • Page 112 Linux DVR System ① ENTER button means converting to initial menu screen of Setup Mode after storing newly set value. ② CANCEL button means to convert to initial menu screen of Setup Mode maintaining existing value without storing newly set value. When the user presses CANCEL button from the top stage even if the user ENTER button from the lower stage, the new value set by the user is not stored and the existing value is maintained.

  • Page 113: Setup Mode - Parallel Port Setup

    Linux DVR System 13. SETUP MODE – Parallel Port Setup SETUP MODE-Setup of parallel port enables the control of input/output device from remote place. For example, opening/closing of camera monitored entrance/exit door is controlled by parallel port or turning on or off of fluorescent lights are possible. Maximum of 8 devices that can control input/output with Parallel port can be set up.

  • Page 114: Method Of Parallel Port Setup

    Enter to parallel port setup screen selecting parallel port setup from initial screen of SETUP MODE. ※ Check if the cable is well connected to parallel port of ELiSS LD-1600 before the setup of parallel port. ① Move cursor to parallel port desired to set up among 8 parallel ports. ▲ / ▼...

  • Page 115: Ptz Control Mode

    Linux DVR System 14. PTZ CONTROL MODE When pressing VIEWERSET button located at front side of ELiSS LD-1600 in DISPLAY MODE, conversion to PTZ CONTROL MODE is done. In PTZ CONTROL MODE, control of PTZ camera (PAN/TILT, ZOOM, FOCUS, LIGHT, POWER) is possible.

  • Page 116: Selection Of Ptz Control Mode Menu

    When selecting the menu of PTZ CONTROL MODE, ▲/▼ button among Direction Movement buttons located at front side of ELiSS LD-1600 is used for the move of cursor. The menu on which cursor is located is lit with yellow light. ENTER button is used for the selection of menu on which cursor is located.

  • Page 117: Ptz Camera Control Method

    ② When using ▲/▼/◀/▶button among Direction Movement buttons located on the front side of ELiSS LD-1600, PAN/TILT can be controlled as the direction of button. ③ When pressing ENTER button once again, other menu can be selected.

  • Page 118: Control Of Focus

    ② When ▲/▼button among Direction Movement buttons located on the front side of ELiSS LD- 1600 is used, the light of PTZ camera can be turned on and off. ③ When pressing ENTER button once again, other menu can be selected again.

  • Page 119: Control Of Power

    ② When ▲/▼button among Direction Movement buttons located on the front side of ELiSS LD- 1600 is used, the POWER of PTZ camera can be turned on and off. ③ When pressing ENTER button once again, other menu can be selected again.

  • Page 120: Product Specifications For Eliss Ld-1600

    Linux DVR System X . Product Specifications For ELiSS LD-1600 Model name ELISS LD-1600 DX ELiSS LD-1600LX Spec. Pentium-Ⅳ 2.4GHz 256 MB HDD(Storage equipment) 40GB, 80GB, 120GB, 180GB(option) BACK-UP Equipment CD-RW, HDD, FLASH DISK(USB) Embedded Linux Flash Disk Operating System is embedded into Flash Disk...

  • Page 121: Troubleshooting Guide

    Answer 3 Check if Motion Sensitivity Setup is set too dull. Problem Stored data are deleted. Have you changed Date Setup in General Setup? ELiSS DVR deletes all Answer stored data when changing the date. １２１ LeadTech...
  • Page 122 If PAN/TILT, ZOOM/FOCUS is not adjusted while PTZ camera icon is Answer 2 displayed on the screen of ELiSS main body, check if PTZ Type and ID is correctly set. ELiSS is operative. But, screen of specific camera channel is OFF or the Problem quality of image is poor.

  • Page 123: Quality Warranty

    Linux DVR System XI . Quality Warranty This product is manufactured through thorough Quality Control and strict Inspection Process. In case when this product is used in compliance with the instructions of User’s Manual in ordinary environment for 1 year, Product Quality Warranty Term, free repair service is provided in accordance with this Letter of Quality Warranty.
  • Page 124 Linux DVR System Users are requested to fill in and keep the contents in the Quality Warranty Letter for A/S. Product name Product No. Warranty term 1 year from the date of sale Date of purchase Year Month Company name Name User Address...

Table of Contents