DeepSea Power & Light LED Matrix Operator's Manual

Advertisement

Quick Links

LED Matrix
Operator's Manual
4033 Ruffin Road
San Diego, CA
T:
(858) 576-1261
92123- 1817 USA
F:
(858) 576-0219
- 3R SeaLite
®
®
LED Matrix
-3 SeaLite
Record product serial number below as it appears on the nameplate.
Serial #
Connector Type
Pin-outs
• Postive = Pin
• Negative = Pin
• Ground = Pin
• Dimming (if applicable) = Pin
www.deepsea.com
sales@deepsea.com
®
®
Original Instruction - 1
REV 10/31/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LED Matrix and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DeepSea Power & Light LED Matrix

  • Page 1 LED Matrix - 3R SeaLite ® ® Operator’s Manual ® ® LED Matrix -3 SeaLite Record product serial number below as it appears on the nameplate. Serial # Connector Type Pin-outs • Postive = Pin • Negative = Pin • Ground = Pin •...
  • Page 2: Specification Overview

    Operator’s Manual LED Matrix - 3R SeaLite ® ® Specification Overview Standard Connector BH3MP Mechanical Specifications 1 = Hot (DC+) Body Material Hard Anodized Aluminum (7075) 2 = Neutral (DC -) 3 = Chassis Window Material Sapphire Mounts High Strength Stainless Steel Yoke (standard) Weight of Ballast Air: 3.49 kg (7.7 lbs)
  • Page 3: Table Of Contents

    Operator’s Manual LED Matrix - 3R SeaLite ® ® Table of Contents Specification Overview Table of Contents Safety Symbols General Notes & Warnings Pre Dive Inspection Post Dive Inspection Troubleshooting and Maintenance Problems and Causes External Maintenance Recommended Spares Optional Spares...
  • Page 4: Safety Symbols

    This symbol indicates the risk of electrical shock. General Notes & Warnings The LED Matrix -3R SeaLite’s Diver Bottle has a unique design to prevent possible internal pressure buildup in that the Driver Bottle housing will ‘pop’ slightly between...
  • Page 5: Pre Dive Inspection

    Fuse blown. Return to factory. Post Dive Inspection: Interface board Return to factory. blown. 1. Rinse your LED Matrix- 3R SeaLite in fresh water Driver board Return to factory. after every dive. blown. 2. Check conditions of anodes. Clean and replace as needed.
  • Page 6: External Maintenance

    DeepSea Supplied Power & Light for a RMA number prior to returning ● 1 ea: LED Matrix-3R SeaLite O-Ring spares kit your item. Please have your light model number, serial (P/N: 712-025-607-0A-03) number and any other pertinent information along with ●...
  • Page 7 Operator’s Manual LED Matrix - 3R SeaLite ® ® concerning the goods sold under this contract, and unless an affirmation, representation, or warranty made by an agent, employee, or representative is specifically included within this contract, it will not be enforceable by Buyer.

This manual is also suitable for:

3r sealite

Table of Contents