1.0 Installation Use the following instructions for installation of the FibreConnect 1600 (16Gb/s) or 8300 (8Gb/s) Switch. Unpack the box; verify contents • SFP modules • The FibreConnect Switch • Serial cable • Power Cord (FibreConnect 1600 - optional • USB to serial adapter and Driver CD second cord) •...
Logging into Web Tools on page 3 Enter the default username: admin and password: password at the login prompt. You are now logged into the switch, proceed to Logging into Web Tools on page 3 2 ATTO Technology Inc. FibreConnect Getting Started Guide...
Linux (Red Hat and SUSE) a. Open Terminal. Connect the included serial cable from the b. Type screen /dev/ttyS0 9600 FC1600 or FC8300 to the serial port on your c. Press enter. machine. Use the included USB to serial d. Login to the device with username: admin adapter, if neccessary.
DCFM Pro, are as follows: OS X Safari • Fabric summary reporting Java™ Plug-in 1.4.2+ on Windows and Linux • Print zone database summary • Viewing zone configuration • Device accessibility matrix 4 ATTO Technology Inc. FibreConnect Getting Started Guide...
2.0 Zoning Zoning is the partioning of a Fibre Channel fabric into smaller subsets to restrict device access and simplify management. Zoning can be used to seperate devices or segregate bandwidth across the fabric. The following is a basic overview of how to configure zoning. For more information please refer to Chapter 9: Administrative Advanced Zoning, in the Fabric OS Administrator’s Guide, that can be found on the documentation CD.
3.0 Update Firmware Your FibreConnect 1600 or 8300 requires the use of an FTP or SCP to upgrade your firmware. Setting up an FTP Server Telnet to the switch through the terminal application you used in the above steps to The following instructions apply for setting up an FTP initially find the IP of the switch.
Page 10
Upgrading Firmware via Web Tools • Password (no password is required if username anonymous is used) Note • Protocol Type (FTP) ATTO recommends that before upgrading the • Specify Firmware Path (this is the actual switch firmware, a copy of the switch folder location of the unzipped firmware configuration file should be saved to the FTP directory)
All selected config parameters are uploaded configDownload operation may take several minutes to complete for large files. swd77:admin> Do you want to continue [y/n]: 8 ATTO Technology Inc. FibreConnect Getting Started Guide...