Quick Review; (For Still Images Stored In The Built-In Memory) - JVC GR-SXM730 Instructions Manual

DSC
F I NE 1 5
D.S.C. mode indicator
Remaining number
of shots
60 59 1 0
(Blinking)
Pictrue mode display
FULL*
(Snapshot mode with
no frame)
PIN-UP*
(Pin-Up mode)
MULTI-4**
(Multi-Analyzer 4)
MULTI-9**
(Multi-Analyzer 9)
NOTES:
Some sample images have been stored in the built-in
memory at the factory. If you wish to delete them, first
remove the "Protecting Images" function (
then perform the "Deleting Images" function (
33).
If a Snapshot is taken while the camcorder is in the
WIDE mode ( pg. 41), the Snapshot image is
recorded without the black bars at the top and bottom of
the screen.
When you shoot in a dark environment, the still image
will become coarse and its true colors will be lost.
During the D.S.C. recording, the Zooming (
Picture Stabilizer (
( pg. 21) functions can be operated.
Still images are taken in a format based on JPEG (Joint
Photographic Experts Group).
When you use the LCD monitor outdoors under direct
sunlight, the LCD monitor may be difficult to see. If this
happens, close the LCD monitor and use the viewfinder
instead.
To store the still images you shot, we recommend that
you transfer them to a computer and save them on disk
( pg. 34), or transfer them to a VCR connected to the
camcorder and record them onto a tape.
Image data stored in the camcorder's built-in memory
can be transferred to a Windows
the provided image transfer software, Picture Navigator
( pg. 34).
* There is a momentary camera shutter-type blackout
together with the image.
** Continuous camera shutter-type blackout takes place 4
or 9 times with the image, like serial photography, then
the 4 or 9 still images you took are displayed.
Quick Review (for still images stored
in the built-in memory):
image most recently stored in the built-in memory.
1) Set the Power Switch to "
is not lit, press REFRESH for approx. 1 second to select
"DSC".
2) Press 2 and release quickly.
The still image is displayed for approx. 3 seconds. The
message "DELETE OK? PRESS PLAY BUTTON"
appears.
To remove the still image you have checked
(Instant Delete) . . .
Press 4/6 while the message "DELETE OK? PRESS PLAY
BUTTON" is displayed.
pg. 20) and Video Light
® PC and saved using
To check the still
" or " ". If the DSC Lamp
29
EN
pg. 32),
pg.
pg. 20),