BOA 165B Installation Manual page 22

VIOLET (+) OUTPUT TO STARTER
➜
step 4
Safety Shutdown Wires
important! These wires are meant to protect the vehicle
and anyone near the vehicle. They must be connected
appropriately to prevent damage to the vehicle and possi-
ble bodily injury. Failure to properly install these wires may
cause the vehicle to lunge if remote started while in gear.
With all ignition wires properly connected, find the appropriate
safety shutdown wires. These are the brake wire and hood pin wires.
First locate the factory brake wire using your LED tester. Find
the switch at the top of the metal arm coming off the brake
pedal. There are usually two wires connected to that switch.
Locate the wire color according to the web information. With
© 2005 Directed Electronics, Inc.
87
TO STARTER
86
87A
30
+12 VDC CONSTANT (FUSED)
87
86
87A
30
TO 2 nd STARTER
STARTER RELAY
(NOT PROVIDED)
GROUND
85
TO STARTER
2 nd STARTER RELAY
(NOT PROVIDED)
GROUND
85
19