Table of Contents
Advertisement
Quick Links
User Guide for
USB Stick
Thank you for deciding to buy an altec product. In order to ensure correct functioning
and to avoid problems when installing this high-quality German-made product, please
read the entire manual and carefully observe the following points:
• Observe the general guidelines when handling components or modules which can
be damaged by electrostatic charge or discharge (this applies to the products
described in this manual).
• If you should encounter any problems during the installation or use of this prod-
uct, please contact our service department and ask for technical advice. If you do
not do this, your guarantee rights may be impaired.
Support hotline, Monday to Friday: Phone +49 5 11 98381-70 or eMail
support@altec-cs.com
All rights reserved. No part of this manual may be reproduced, duplicated, transcribed,
distributed or translated into another language without express written permission
from altec ComputerSysteme GmbH.
The right is reserved to change specifications without prior notice. All trademarks
mentioned are the property of the respective owners.©altec ComputerSysteme GmbH
HB_USB_Copy_21_e13.qxd4 · Version 1.3 English · 11/2007 · For software version 1.0.5 and above
CopyStation 21
Advertisement
Table of Contents
Summary of Contents for Altec USB Stick CopyStation 21
- Page 1 USB Stick CopyStation 21 Thank you for deciding to buy an altec product. In order to ensure correct functioning and to avoid problems when installing this high-quality German-made product, please read the entire manual and carefully observe the following points: •...
-
Page 2: Table Of Contents
License Agreement Table of contents Introduction This is a legal agreement between you, the user, and altec ComputerSysteme GmbH. Product description This agreement covers the altec USB Stick CopyStation Software. All rights not express- Features ly granted under this agreement are reserved by the manufacturer of the Software. By Scope of delivery installing or using the Software you agree to be bound by the terms of this agreement. -
Page 3: Introduction
Copies up to 21 USB 2.0 sticks with 512 MB in less than 6 minutes USB 2.0 and USB 1.1 memory sticks can be used in the USB Stick CopyStation 21.The USB (speed depends on USB stick type and USB connection). -
Page 4: Installing The Usb Stick Copystation
In order to start the USB Stick CopyStation program, double-click the "usbcopy21.exe" file in the program folder. You need to have administrative rights to run the program properly. User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 5: Copying From Data Images
The image has been fully created when the progress bar reaches 100 %, the message "Operation done" appears in the message panel on the left of the main window and the slot color changes to green again. User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 6: Optional: Creating A Short Image File
If you create a short image file, it (see next chapter). will only contain data for memory blocks which are being used. User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 7: Creating A Copy Job
Click "Save" to save the file. loading a new job. User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 8: Starting A Copy Job
100 %, the message "Operation done" appears in the message panel on the left and the slot color changes to green again. User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 9: User Software Menus And Functions
"Write . . . all stick" opens the "Write Options" dialog where you have to select an image file. After confirming the selection with "OK", copying to all sticks is started. User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 10: Info" Menu
Detailed information on using this soft- ware feature can be found in chapters 4.2 and 4.3. User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 11: Software Option "File Copy
Click the "OK" button and enter the required name and location for the job file in the "Save As" dialog box which is shown (see page 13). Click "START" to start programming (see page 14). User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 12: Software Interface For E.g. External Serialization
6.3.1 General Description 6.3.3 Accessing the memory stick through filesystem calls The USB Stick CopyStation 21 has an optional software interface for data exchange When the memory stick has been mapped to the logical drive, the external patch with an external application to allow customization of individual memory sticks. -
Page 13: Technical Specifications
Software interface for e.g. – 31AL1854 normally be identical to the storage capacity of the destination USB sticks. external serialization – 31AL1857 Software File Copy User Guide USB Stick CopyStation 21 – 1.3 User Guide USB Stick CopyStation 21 – 1.3... -
Page 14: Other Possible Sources Of Error
Settings" tab of the Job Wizard (see figure below and Chapter 4.2). Please ask for our product overview or visit our website for information on further CopyStations, storage products, Flash Card Drives and Solid State Disks from altec: www.altec-cs.com On the destination USB sticks, the additional storage capacity, which is often only a few bytes, will no longer be available for storing data until the USB sticks are re-formatted.
Need help?
Do you have a question about the USB Stick CopyStation 21 and is the answer not in the manual?
Questions and answers