Dip Switch Settings - CableTronix CT-HDBASET-330 Operating Instructions Manual

※ DIP Switcher Instruction:
1 2 3 4
X X
X X
0 0
0 0
0 1
0 1
1 0
1 0
1 1
1 1
Note 1: Copy the first detected display's EDID to the input port.
Note 2: The matrix will use the embedded 1080P-stereo 3D compatible EDID.
Note 3: The matrix will use the embedded 1080P-stereo EDID.
Note 4: The matrix will use the embedded 1080i-stereo EDID.
Note 5: The matrix will use the embedded 1080P-5.1 EDID.
Note 6: The matrix will use the embedded 1080P-7.1 EDID.
Note 7: Upgrade MCU through RS232 port.
Note 8: Upgrade Main Chip through RS232 port.
※For RS232 signal transmission, do not set RS232 port to upgrade modes.
Connect two RS232 cables to both RS232 ports of CT-HDBASET-330 and
CT-HDBASET-330, these two cables work together as one extension cable.
X 0 Normal mode
X 1 Long Cable mode
0 X Copy from the first detected display (note1)
1 X 1080P 3D stereo (note2)
0 X 1080P stereo (note3)
1 X 1080i stereo (note4)
0 X 1080P 5.1 (note5)
1 X 1080P 7.1 (note6)
0 X MCU Upgrade mode(note7)
1 X Main Chip Upgrade mode(note8)
Function
4 | P a g e