Connecting Digital Audio Equipment; Connecting The Controller - Sony SCPH-77004 Instruction Manual

Connecting digital audio
equipment
By using a commercially available optical digital cable, you can enjoy
surround sound with the effect of being in a movie theatre or a concert
hall. When connecting the console to audio equipment with digital
connectors, refer to the instructions supplied with the device to be
connected.
Connected device
DIGITAL IN
OPTICAL
Commercially available optical
digital cable
• If you connect the console to audio equipment using an optical digital cable, it
Notes
may affect the audio output of some PlayStation
result that no sound is produced. If this happens, use a cable such as the
supplied AV Cable (integrated audio/video) and connect it to the console 's
AV MULTI OUT connector. Do not use an optical digital cable.
• After connecting digital audio equipment, set "Digital Out (Optical)" to "On"
in the System Configuration menu. For details, see "Digital Out (Optical)"
( page 37).
12

Connecting digital audio equipment

Console rear
2 format software with the
®

Connecting the controller

1
Insert the Analog Controller (DUALSHOCK
port of the console.
MEMORY CARD
Analog Controller
(DUALSHOCK
Some software titles designate a specific controller port to be used. Refer to the
Note
instructions supplied with the software for details.
2) into a controller
®
Console front
2)
®