Honda 2010 Civic Sedan Owner's Manual page 315

Wiper Blades
WIPER ARM
Pivot the blade assembly toward
the wiper arm until it releases
from the wiper arm.
When replacing a wiper blade,
make sure not to drop the wiper
blade or wiper arm down on the
windshield.
312
BLADE
3. Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
I n f o r ma t i o n P r o v i d e d b y :
4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
REINFORCEMENT
BLADE
TOP
Make sure the three rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.