Product View; Maintenance; Power Switch - Bissell 8931 SERIES User Manual

A

Product View

Do not plug in your vacuum until you are familiar
with all instructions and operating procedures.
1 Power/Brush Roll On/Off
2 2-Way Folding Handle
Release
3 Hand Vacuum Release
4 Charging Light Indicator
5 Detachable Hand Vacuum
6 Dirt Cup Release
B
Assembly
No tools are required for assembly; simply
insert foot into body of unit until you hear
a click.
charging
before charging make sure unit is in the
OFF position.
1. insert the charging adapter plug into the
charging port on the back of the unit or the
bottom of the charging base.
2. Plug the adapter into the wall outlet. if
using the charging base, the unit should be
folded and close to the wall. The red indica-
tor light will illuminate and remain on when
plugged into wall outlet. Charge the unit
completely for 24 hours prior to first use.
NOtE: the adapter may become warm
during charging – this is normal.
3. When the unit is fully discharged, approxi-
mately 16 hours of charging is required for
the battery to regain full capacity.
C
Operations

Power switch

The power switch is located on the top
of the handle. settings include:
(O) = OFF
(i) = suction ON
(bRUsH) = suction and brush ON
using your stick vacuum
1. Push power switch on to desired setting.
2. easily clean hard floors, low pile carpet,
and area rugs.
3. When finished cleaning, turn power switch
to OFF (O) position.
2-way folding handle
This feature is great for cleaning under
couches, beds and other hard to reach areas.
7 Filter
8 Dirt Container
9 Integrated Crevice Tool
10 Pet Hair Nozzle
11 Swivel Head
12 Pet Hair Lint Strip
13 Charging Base
1. To release, push button located under
power switch to bend handle forward for
cleaning under furniture.
2. For space saving storage, push button
to bend handle backward.
cleaning with the
Removable Hand Vac
1. Remove hand vac by pressing the
release button.
2. Power switch is located under handle and
should be depressed while cleaning is
taking place.
3. easily clean messes on furniture, stairs,
and other hard to reach areas. The Pet Hair
Nozzle is designed to attract and pull pet
hair and dirt from upholstery and carpet.
4. To access the integrated crevice tool, pull
on tab on front of nozzle. listen for click to
know crevice tool is ready to use.
5. When done cleaning, simply push crevice
tool back into unit.
D

Maintenance

& Care
To maintain maximum cleaning performance,
the following maintenance steps must be
performed:
d1 Emptying the dirt cup
Dirt cup should be emptied before debris
reaches the FUll line on cup.
1. Turn power OFF (O) and remove hand
vacuum from unit, as directed in step 1
"Cleaning with the Removable Hand Vac".
2. Hold hand vacuum vertically and depress
the release button to release dirt container.
3. Gently pull dirt container away from the
hand vacuum grip and remove the filter.
empty dirt into waste container.
4. Replace filter back into the dirt container
and attach dirt container to hand vacuum
until it snaps securely in place.
d2 cleaning or Replacing
the filter
The key to maximum performance is having
a clean filter. Cleaning the filter after each
use will help your vacuum operate at peak
efficiency.
Use only genuine bissell model
number 52H6 replacement filters in
your bissell vacuum. To purchase visit
www.bissell.com).
www.bissell.com
5