Whirlpool MW-25BG Instruction Manual page 16

19. MEMORY FUNCTION
(1) Press "0/MEMORY" to choose memory 1-3 procedure. The LED will display 1,2,3.
(2) If the procedure has been set, press " START" to use it. If not, continue to
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "START" once to save the procedure and
turn back to the waiting states.If press " START" again,it will start cooking.
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORY" twice,stop pressing until the screen displays "2".
b.Press "COOK TIME" once,then press "3","2","0" in order.
c. Press "MICROWAVE" once,"PL10" display,then press "8" and "PL8" displays.
d. Press "START" to save the setting. Buzzer sounds once then turn back to
waiting states. If you press "START " again, the procedure will be saved as the
memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting state, press "0/MEMORY" twice,
screen displays "2", then press "START" to run.
20. INQUIRING FUNCTION
(1) In cooking state, press " CLOCK/KITCHEN TIMER ", the LED will display clock for three
seconds.
(2) In the microwave cooking state, press " MICROWAVE " to inquire microwave power
level, and the current microwave power will be displayed.
After three seconds, the oven will turn back to the previous state. In multi-stage state,
the inquiring way can be done by the same way as above.
21. COOKING END REMINDING FUNCTION
When the cooking is over, the buzzer will sound 5 "beep" to alert user the cooking is finished.
22. OTHER SPECIFICATIONS
(1) In standby state , if the set clock digital tube displays current time, the icon " : " would
flash; otherwise, it shows " 0:00 ".
(2) In setting function state, LED displays corresponding setting.
(3) In working or pause state, LED displays surplus cooking time.
14