Schematic Diagram Notes - Panasonic SJ-MJ75 Service Manual

8. Schematic Diagram Notes

8.1. Schemtic Diagram Notes
This schematic diagram may be modified at any time with the development of
new technology.
Notes:
-
S201 : Volume (VOLUME +) switch.
-
S202 : Volume (VOLUME -) switch.
-
S203 : F. skip / search (
-
S204 : R. skip / search (
-
S206 : Play / stop (
-
S207 : Cover open / close det. switch.
-
S208 : Hold switch in "OFF" position.
-
Indicated voltage values are the standard values for the unit measured by the
DC electronic circuit tester (high-impedance) with the chassis taken as
standard. Therefore, there may exist some errors in the voltage values,
depending on the internal impedance of the DC circuit tester.
No mark: MD STOP
( ): MD play [1kHz, L+R, 0dB]
Important safety notice:
Components identified by
safety.
Furthermore, special parts which have purpose of fire-retardant (resistors), high-
quality sound (capacitors), low-noise (resistors), etc. are used. When replacing
any of components, be sure to use only manufacture's specified parts shown in
the parts list.
Caution!
IC and LSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during repair.
Cover the parts boxes made of plastics with aluminum foil.
Ground the soldering iron.
Put a conductive mat on the work table.
) switch.
) switch.
) switch.
mark have special characteristics important for
45