Setting Up Your Yard Vacuum - Cub Cadet Series 060 Operator's Manual

3
Setting Up
Your Yard
Vacuum
IMPORTANT
This unit is shipped
without gasoline or
oil in the engine. Be
certain to service
engine with gasoline
and oil as instructed
in the separate engine
manual before operat-
ing your machine.
NOTE:
Reference to right
and left hand side of
the Yard Vacuum is
observed from the
operating position.
Wing Nut
Upper Hose
Handle Bracket
Rope Guide
Handle Knobs
Lower Hose
Handle Bracket
Lower Handle
Safety Glasses
Bottle of Engine Oil
Operator's Manual
Figure 3-1
NOTE: This Operators Manual covers a range of product
specifications for various models. Characteristics and fea-
tures discussed and/or illustrated in this manual may not
be applicable to all models. Cub Cadet reserves the right
to change product specifications, designs and equipment
without notice and without incurring obligation.
Cable Guide
IMPORTANT: This unit is shipped without gasoline or oil
in the engine. Be certain to service engine with gasoline
and oil as instructed in the separate engine manual
before operating your machine.
Carriage
Screws
NOTE: Reference to right and left hand side of the Yard
Vacuum is observed from the operating position.
Wing Nuts
Opening Carton
1. Cut each corner of the carton vertically from top to
Bag
2. Remove all loose parts.
3. Remove loose packing material.
Removing Unit From Carton
Hose
1. Lift unit from the rear to detach it from underlying
Assembly
Blower Chute
2. Check carton thoroughly for any other loose parts.
(if equipped)
NOTE: Make sure not to crimp cables while removing
loose parts or the entire unit from the carton.
Loose Parts In Carton
6
bottom.
carton material and roll unit out of carton.
a. Upper and Lower Handle
b. Hose Assembly
c. Safety Glasses
d. Engine Oil (May be located in bag)
e. Bag
f. Blower Chute (If Equipped)
g. Operator's Manual
(See Figure 3-1)