Quick Operation Guide - JVC GR-AXM670 Instructions Manual

QUICK OPERATION GUIDE

SUPPLY POWER
BATT. RELEASE
Using the battery pack
1
Hook-on the battery pack's top end to the
camcorder. (Charging procedure,
2
Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
PLAYBACK
1
Set to "PLAY"
1
Set the Power Switch to "PLAY".
2
Press REW.
— The tape will automatically stop at the
beginning of the tape.
3
Press PLAY/PAUSE.
— Playback starts and the playback picture
appears.
•To stop playback, press STOP.
(For more details,
•The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
Or simply play back the tape on a VHS
VCR using the Cassette Adapter (VHS
Playpak). pg. 41
Hook on.
1
2
Push in.
pg. 8)
3
PLAY/PAUSE
2
REW
STOP
pg. 38.)
INSERTING A VIDEO
CASSETTE
PUSH
4
1
Open
1
Open the LCD monitor to an angle of over
45 degrees.
2
Press EJECT to open the cassette holder.
3
Insert a video cassette.
4
Press PUSH to close the cassette holder.
(For more details,
SHOOTING
2
Set to
"CAMERA"
1
Slide the LENS COVER Open/Close Switch
to open the lens cover.
2
Set the Power Switch to "CAMERA".
— The power indicator will light and an
image will appear.
3
Press the Recording Start/Stop Button.
— Recording starts.
• To stop recording temporarily, momentarily
press the Recording Start/Stop Button once
again.
(For more details,
• The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
• The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
EN
EJECT
2
3
pg. 13)
1
LENS COVER
Open/Close Switch
3
Recording
Start/Stop Button
pgs. 16 – 19)
5